快速部署Enterprise Manager Cloud Control 12c(12.1) Agent

2011/10/18 by 4 Comments

在<OEL 5上快速部署Enterprise Manager Cloud Control 12c(12.1)>中我介绍了如何安装配置Oracle Enterprise Manager Cloud Control 12c(12.1) Server ，我们知道光有EM Server而不部署Agent是无法发挥其管理特性的。

接下来我们会再次通过实践了解Em 12c(12.1)中部署Agent代理程序的过程，整个过程和10g/11g Grid Control中的Deploy Agent有较大的区别。

 

这里我们要注意一点，OMS 12c(12.1) 只能和12.1 的Agent 代理程序配合工作，而不能使用之前任何版本的Agent。“Enterprise Manager Cloud Control can communicate only with Oracle Management Agent 12c and not with any other earlier release of the Management Agent. You can not configure your exising Agents to communicate with Enterprise Manager 12c OMS.”

 

系统和软件包要求

 

推荐在Oracle Enterprise Linux 5.7或6.1上安装EM 12c的agent ， 可以从edelivery.oracle.com 下载到这2款操作系统的安装介质。

以下演示中的主机均采用Oracle Enterprise Linux 5.7 操作系统。

以下表格列出了在Oracle Linux 6或5.x上 安装EM 12c agent ，所要求预装的操作系统软件包，这些软件包可以直接从OS安装DVD介质中找到:

 

Platform 32-Bit Packages for 32-Bit Platform 64-Bit Packages for 64-Bit Platform
Oracle Linux 6
  • make-3.81
  • binutils-2.17.50.0.6
  • gcc-4.1.1
  • libstdc++ 4.1.1
  • make-3.81
  • binutils-2.17.50.0.6
  • gcc -4.1.1
  • libstdc++ -4.1.1
Oracle Linux 5.xRed Hat Enterprise Linux 5.x
  • make-3.81
  • binutils-2.17.50.0.6
  • gcc-4.1.1
  • libstdc++-4.1.1
 Oracle Linux 5.6Red Hat Enterprise Linux 5.6

  • make-3.81
  • binutils-2.17.50.0.6
  • gcc -4.1.1
  • libaio-0.3.106
  • glibc-common-2.3.4
  • libstdc++ -4.1.1
  • setarch-1.6
  • sysstat-5.0.5
  • rng-utils-2

Oracle Linux 5.3 and 5.4

Red Hat Enterprise Linux 5.3 and 5.4

  • make-3.81
  • binutils-2.17.50.0.6
  • gcc -4.1.1
  • libstdc++ -4.1.1

 

更多关于OS软件要求的信息，可以直接访问EM 安装手册 <Meeting Package, Kernel Parameter, and Library Requirements>章节。

 

准备工作

 

1. 12c 部署agent 要求在创建必要的credential profile，该credential profile将包含能够从OMS server ssh到目标节点target node的用户身份认证，且要求该用户能够在target node上以sudo执行root用户的权限。

这里我们以oracle用户为例，我们将以目标节点上的oracle用户身份创建credential profile，首先我们要确保oracle用户能够以sudo 执行root用户的权限，这需要用到/etc/sudoers配置文件:

 

!确保/usr/local/bin/sudo 这个符号链接存在

[root@vrh2 ~]# ln -s /usr/bin/sudo /usr/local/bin/sudo

[root@vrh2 m01]# ls -l /etc/sudoers
-r--r----- 1 root root 3407 Oct 18 19:30 /etc/sudoers

[root@vrh2 m01]# cp /etc/sudoers /etc/sudoers.bak 

打开/etc/sudoers 将以下三处修改

修改前:
Defaults   requiretty

修改后:
Defaults:oracle !requiretty

修改前:
Defaults   !visiblepw

修改后:
Defaults   visiblepw

修改前:
##
## Allow root to run any commands anywhere
root    ALL=(ALL)       ALL

修改后

##
## Allow root to run any commands anywhere
root    ALL=(ALL)       ALL
oracle  ALL=(ALL)       ALL                        --这里加一行

以上三处修改完成后，save 文件 

测试oracle 能否正常sudo 

[root@vrh2 m01]# su  - oracle

[oracle@vrh2 ~]$ ls -l /root
ls: /root: Permission denied

[oracle@vrh2 ~]$ sudo ls -l /root

[sudo] password for oracle:
total 88
-rw------- 1 root root  1832 Aug 11 05:26 anaconda-ks.cfg
drwxr-xr-x 2 root root  4096 Aug 10 21:31 Desktop
-rw-r--r-- 1 root root 56307 Aug 11 05:26 install.log
-rw-r--r-- 1 root root  4136 Aug 11 05:26 install.log.syslog

 

2. 在目标节点上创建必要的目录 :

 

[root@vrh2 m01]# mkdir /m01

[root@vrh2 m01]# chown oracle:oinstall /m01

 

3.  确保OMS server 和target server 间的通信畅通，如没有使用dns 服务 ，那么不要忘记将host/ip 信息写入到/etc/hosts文件中，如果漏掉这部将报target node can not be  reached 错误

 

正式安装

 

首先再次以sysman身份登录EM https console，如https://192.168.1.169:7799/em。

点击右上角的setup-> Add Target -> Add Targets Manually

 

 

进入Add Targets Manually页面，选择” Add Host Target” ，并点击Add Host …按钮:

 

 

在”add Target – Host and Platform “页面使用默认的”session name”即可，点选”+Add”按钮填入主机名和平台信息:

注意这里推荐填入规范的hostname，如”vrh2.oracle.com”， 注意主机名不能带下划线 “_”， 若Platform下拉列表中没有你要的平台那么说明在该平台上还没有12.1 的agent可用。

 

 

输入完成后点击Next进入”Add Target –  Installation Details ” 页面，点中deployment details 出现下来菜单选择Fresh Agent install ，并填入installation base directory 等目录信息。

 

接着在Named confidential 点击蓝色的”+” 图形按钮，会跳出 create new Named confidential 的窗口，填入之前配好的oracle用户的信息:

 

 

完成后点击Ok,回到原”Add Target –  Installation Details “界面，确认并点击Next:

 

 

进入Review页面，确认信息正确并点击Deploy Agent:

 

 

完成后会进入Agent Deployment summary 页面 ，这里存在三个阶段：

  1. Initialization    — 拷贝agent介质到目标服务器
  2. Remote Prerequisite Check   — 检测目标服务器的安装先决条件
  3. Agent Deployment             –具体的Installation Agent 、Secure Agent 和 执行root.sh

 

若一开始没有正确配置用户的sudo ，则可能在Remote Prerequisite Check阶段出现检测警告，例如下图:

 

 

如果一切顺利，以上三个阶段完成后Agent即在运作了:

 

 

Agent Deployment 的日志存放在 $OMS_HOME/sysman/prov/agentpush/$date目录下，也可以从EM的网页界面上找到这些日志的具体位置。

 

之后点击Target -> host可以看到新加入的主机:

 

 

之后点击Target -> Database  -> add 添加数据库配置信息:

 

在host栏填入新增加的目标服务器，并点击continue:

 

 

EM 会自动找出目标服务器上已有的数据库, 点击Configure 填入dbsnmp用户的密码后保存并Continue:

 

 

之后点击Target -> database 就可以看到新增的数据库了:

 

 

点击数据库名 -> 点击Performance -> Performance Home后可以看到新的12c   的性能总览图:

 

Filed Under: Oracle, Oracle 12c新特性 Tagged With: , , , , ,

在OEL 5上快速部署Enterprise Manager Cloud Control 12c(12.1)

2011/10/16 by 10 Comments

在OOW 2011期间甲骨文发布了新一代的企业管理器Enterprise Manager Cloud Control 12c,这里我们来介绍如何在Oracle Enterprise Linux 5上快速部署EM 12c和其Agent。

 

硬件要求

安装Enterprise Manager Cloud Control 12c的硬件要求如下表，推荐至少有4GB内存

 

Small Medium Large
(1 OMS, <=1000 targets, <100 agents) (2 OMSes for <=10,000 targets and <1000 agents) (> 2 OMSes, >=10,000 targets, >=1000 agents)
CPU Cores/Host 2 4 8
RAM 4 GB 6 GB 8 GB
RAM with ADPFoot 1 , JVMDFoot 2 6GB 10 GB 14 GB
Oracle WebLogic Server JVM Heap SizeFoot 3 512 MB 1 GB 2 GB
Hard Disk Space 7 GB 7 GB 7 GB
Hard Disk Space with ADP, JVMD 10 GB 12 GB 14 GB

 

Footnote 1 ADP Manager is Application Dependency and Performance

Footnote 2 JVMD is JVM Diagnostics

Footnote 3 Default heap size is 512 MB. For higher heap size, set the size manually.


系统和软件包要求

 

推荐在Oracle Enterprise Linux 5.7或6.1上安装EM 12c ， 可以从edelivery.oracle.com 下载到这2款操作系统的安装介质。

以下演示中的主机均采用Oracle Enterprise Linux 5.7 操作系统。

以下表格列出了在Oracle Linux 6或5.x上 安装EM 12c ，所要求预装的操作系统软件包，这些软件包可以直接从OS安装DVD介质中找到:

Platform 32-Bit Packages for 32-Bit Platform 64-Bit Packages for 64-Bit Platform
Oracle Linux 6
  • make-3.81
  • binutils-2.17.50.0.6
  • gcc-4.1.1
  • libaio-0.3.106
  • glibc-common-2.3.4
  • compat-libstdc++296
  • libstdc++ 4.1.1
  • libstdc++devel 4.1.0
  • sysstat-5.0
  • compat-db 4.1.25
  • make-3.81
  • binutils-2.17.50.0.6
  • gcc -4.1.1
  • libaio-0.3.106
  • glibc-common-2.3.4
  • libstdc++ -4.1.1
  • sysstat-5.0.5

In addition, install the 32-bit version as well as the 64-bit version of glibc-devel-2.5-49.
Oracle Linux 5.xRed Hat Enterprise Linux 5.x
  • make-3.81
  • binutils-2.17.50.0.6
  • gcc-4.1.1
  • libaio-0.3.106
  • glibc-common-2.3.4
  • compat-libstdc++296-2.96
  • libstdc++ 4.1.1
  • libstdc++devel-4.1.0
  • setarch-1.6
  • sysstat-5.0.5
  • compat-db 4.1.25
  • rng_utils-2.0
  • make-3.81
  • binutils-2.17.50.0.6
  • gcc -4.1.1
  • libaio-0.3.106
  • glibc-common-2.3.4
  • libstdc++ -4.1.1
  • setarch-1.6
  • sysstat-5.0.5
  • rng-utils-2.0

In addition, install the 32-bit version as well as the 64-bit version of glibc-devel-2.5-49.

 

更多关于OS软件要求的信息，可以直接访问EM 安装手册 <Meeting Package, Kernel Parameter, and Library Requirements>章节。

 

 

准备工作

在正式部署EM 12c 之前我们需要完成一系列的准备工作，包括：

1. 下载EM 12c(12.1) 安装介质

EM 12.1的安装介质可以从Oracle技术网络OTN上找到其下载页面，64位软件的具体下载地址:

 

 

介质包括 disk1和disk2 2个接近3GB的zip压缩包，其中em12_linux64_disk1of2.zip包含了主要的EM binary，而em12_linux64_disk2of2.zip包含了为EM扩展的插件，如支持Exadata、IBM DB2的插件等。

 

2. 在安装EM的Host上创建EM软件的拥有者OS账号

这里我创建oem用户来执行后续的安装操作:

 

groupadd -g 800 oinstall
useradd -g oinstall oem

 

3. 解压安装介质

创建存放解压后安装介质的目录并解压上述zip包：

 

su - oem
[oem@vrh5 tmp]$ mkdir em_cloud
[oem@vrh5 tmp]$ cd em_cloud/

[oem@vrh5 em_cloud]$ unzip ../V28375-01.zip
[oem@vrh5 em_cloud]$ unzip ../V28376-01.zip

 

4. 在EM主机上安装必要的rpm 软件包以及调整/etc/sysctl.conf中的内核参数，该步骤可以通过oracle-validated工具代劳，详见<Understand Oracle Validated Configurations>


5. 为 EM拥有者用户配置必要的ulimit 参数 , 需要修改/etc/security/limits.conf配置文件，如:

[root@vrh5 ~]# tail -10 /etc/security/limits.conf
#ftp             hard    nproc           0
#@student        -       maxlogins       4

# End of file

oem soft nofile 4096
oem hard nofile 4096

 

6. 为EM 12c配置合适的repository database以存放数据

这里可以在Metalink上的Certification Matrix中找到EM 12c已认证的数据库版本,如下图所示 11.2.0.2和11.2.0.3 均已通过该认证:

 

 

这里推荐新建一个11.2.0.2 版本的数据库作为EM Repository。

此外作为EM Repository的数据库还必须使用EM所要求的初始化参数，这些要求包括:

Check the CBO stats gathering job	Disable the stats gathering job

  1.Check the processes instance parameter value
  The processes instance parameter needs to be set to at least 300.

  2.Check the session_cached_cursors instance parameter value.
  The session_cached_cursors instance parameter should be set to 300.
  Any value between 200 and 500, inclusive, will be accepted.

 3.Check the job_queue_processes instance parameter value.
   The job_queue_processes instance parameter should be set to 20.

 4.Check the shared_pool_size instance parameter value.
   The shared_pool_size instance parameter should be set to
   at least 600 megabytes or roughly one third of the sga_target size.

 5. Check the redo log size.
    The size of the EM database instance should be 300 megabytes or greater.
    Generally, there should be 3 or more redo logs available of this size.

 6. Ensure that the EM tablespace has at least one datafile set to autoextensible
    Add at least one datafile with the autoextend attribute to the EM tablespace

 7.Check the open_cursors instance parameter value.
   The open_cursors instance parameter should be set between 300 and 400, inclusive.

 8.Check the sga_target instance parameter value.
   The sga_target instance parameter should be set to at least 2 gigabytes, and
   roughly twice the size of the pga_aggregate_target setting.

 9.Check for invalid objects in the EM repository
   Compile all invalid objects in the EM repository

 

可以通过以下命令满足上述的参数要求，当然参数的值还可以适当放大:

 

  alter system set processes= 500 scope=spfile;
  alter system set session_cached_cursors=500 scope=spfile;
  alter system set shared_pool_size=650M scope=spfile;
  alter system set job_queue_processes=22 scope=spfile;
  alter database add logfile size 320M;
  alter system set open_cursors=350 scope=spfile;
  alter system set sga_target=2g scope=spfile;
  ALTER SYSTEM SET pga_aggregate_target=1G SCOPE=SPFILE;

 

注意EM 要求 repository database没有配置DB control ，如果有的话需要通过下列命令drop 掉:

 

export ORACLE_HOME= $YOUR_ORACLE_HOME
export ORACLE_SID= $Repository_SID

$ORACLE_HOME/bin/emca -deconfig dbcontrol db -repos drop

 

同时要求sysman 和 sysman_mds、 sysman_opss用户不存在，已创建该用户的DB 可以drop 掉:

 

SQL> select * from v$version;

BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE    11.2.0.2.0      Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production

SQL> select * from global_name;

GLOBAL_NAME
--------------------------------------------------------------------------------
www.askmac.cn & www.askmac.cn

drop user sysman cascade;
drop user sysman_mds cascade;
drop user sysman_opss cascade;
drop user sysman_apm cascade;
drop user sysman_ro cascade;
drop user mgmt_view cascade;

@?/rdbms/admin/catsnmp

 

7. 确保能够从EM 主机顺利登录到 repository 数据库 :

 

[oem@vrh5 tmp]$ tnsping vrh4:1521/SBDB

TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 16-OCT-2011 21:18:24

Copyright (c) 1997, 2010, Oracle.  All rights reserved.

Used parameter files:

Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=SBDB))(ADDRESS=(PROTOCOL=TCP)
(HOST=192.168.1.167)(PORT=1521)))
OK (0 msec)

[oem@vrh5 tmp]$ sqlplus  sys/maclean@vrh4:1521/SBDB  as sysdba

SQL*Plus: Release 11.2.0.2.0 Production on Sun Oct 16 21:18:54 2011

Copyright (c) 1982, 2010, Oracle.  All rights reserved.

Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL>

 

8. 确保网络正常

这里要求EM主机必须使用statics IP 静态IP ，否则安装会出错， 且已正确在/etc/hosts或DNS配置唯一的域名解析

 

正式安装

 

我们开始正式通过OUI安装Oracle Enterprise Manager Cloud Control 12c(12.1)，这里要用到图形化的界面，确保DISPLAY环境变量正确或者使用Xmanager之类的软件:

 

(oem)$ unset ORACLE_HOME ORACLE_BASE ORACLE_SID
(oem)$ export DISPLAY=:0
(oem)$ cd /tmp/em_cloud/

注意这里若你的EM Host拥有多个host name ,那么要使用ORACLE_HOSTNAME参数指定规范的host name 

如/etc/hosts 中的信息为： 192.168.1.8 vrh5 vrh5.oracle.com 

那么要选用vrh5.oracle.com 这个hostname 

如果host name 中带"_"符号 可能导致安装失败

(oem)$ ./runInstaller ORACLE_HOSTNAME=vrh5.oracle.com

Starting Oracle Universal Installer…

 

如下图OUI界面顺利启动，勾销” I wish to receive security update…”，并点击Next:

 

 

 

Prerequisite Checks会检测EM安装的前提条件，这里因为物理内存不足(要求3g)而出现Warning，点击Next忽略该警告

 

 

点击Yes,忽略该问题

 

 

若检测顺利，则如下图:

 

 

下一步选择create a new Enterprise Manager -> Simple ，为Middleware Home location选定一可用的空目录，注意目录的拥有者应为oem(EM 所有者用户)

 

 

选择想要安装的插件，这里我们不安装额外的插件，保持默认配置点击Next:

 

 

选择暂时不安装Exalogic Elastic Cloud Infrastructure插件, Install Later:

 

 

配置Weblogic Server，填入Weblogic和Node Manager密码及OMS instance Base Location:

 

 

配置数据库连接信息，填入repository database的连接信息:

 

 

输入 sysman用户和Agent注册使用的密码， 安装程序会自动为你提供EM所需创建表空间数据文件的位置：

 

 

选择EM 12c将要使用的端口，一般默认即可，除非这些端口有其他用途:

 

 

点击 Next后 再点击Install Now进入安装过程:

 

 

安装流程包括Copy Files、Configure Plugins Prerequisites Check、Repository Configuration、MDS Schema Configuration、OMS Configuration、Plugins Deployment and Configuration 、 Start Oracle Management Service、 Oracle Configuration Manager Repeater、Agent Configuration Assistant 、Run root scripts，总耗时在1个小时左右。

在此过程中推荐监控安装进程的日志，这些日志的位置如下:

例如:

/m01/midd/oms/sysman/log/schemamanager/m_$date/m_$date.CREATE/em_repos_config.log
/m01/midd/oms/sysman/log/schemamanager/m_$date/m_$date.CREATE/emschema.log
/m01/midd/oms/cfgtoollogs/cfgfw/oracle.sysman.top.oms_*.log
/m01/midd/oms/cfgtoollogs/omsca/*.log

em_repos_config.log记录了em repository的配置日志，在此安装过程中可能遇到如下错误:

INFO: oracle.sysman.top.oms:__________________________DUMPING PARAMETERS
INFO: oracle.sysman.top.oms:OracleHome: /m01/midd/oms
INFO: oracle.sysman.top.oms:Connect String: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)
(HOST=vrh4.oracle.com)(PORT=1588)))(CONNECT_DATA=(SID=SBDB)))
INFO: oracle.sysman.top.oms:SYS User: SYS
INFO: oracle.sysman.top.oms:________________________________________________________________________
INFO: oracle.sysman.top.oms:MDS Schema Creation status: RUNNING
SEVERE: oracle.sysman.top.oms:MDS Schema Creation is failed
INFO: oracle.sysman.top.oms:_______________________________________________________________________
INFO: oracle.sysman.top.oms:Starting opss Schema Creation.
INFO: oracle.sysman.top.oms:OPSS Component is already created
INFO: oracle.sysman.top.oms:_______________________________________________________________________
INFO: oracle.sysman.top.oms:Starting APM Schema Creation.
INFO: oracle.sysman.top.oms:APM Component is already created
INFO: oracle.sysman.top.oms:The plug-in MDS Schema Configuration has failed its perform method
INFO: oracle.sysman.top.oms:About to execute plug-in MDS Schema Configuration
INFO: oracle.sysman.top.oms:The plug-in MDS Schema Configuration is running

SEVERE: oracle.sysman.top.oms:MDS Schema Creation is failed 创建失败是由bug引起的

 

遇到该错误后，手动登录到数据库并执行以下create user命令:

 

 create user SYSMAN_MDS identified by sysman_mds;

创建该SYSMAN_MDS用户后，回到安装界面并点击retry按钮，安装会继续下去。

OMS和Agent配置过程中的日志如下:

INFO: oracle.sysman.top.oms:The plug-in OMS Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.OMSConfiguration
INFO: oracle.sysman.top.oms:Classpath = /m01/midd/oms/sysman/jlib/omsConfig.jar:
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration
invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=5:microstep=0
INFO: oracle.sysman.top.oms:Fetcing ports from teh static ports file: /m01/midd/.gcinstall_temp/staticports.ini
INFO: oracle.sysman.top.oms:COMMAND: /m01/midd/oms/bin/omsca NEW -RESPONSE_FILE
/m01/midd/oms/omscarespfile -lock_console -lock_upload -CONFIGURE_REPEATER true -nostart
INFO: oracle.sysman.top.oms:
 Check the OMS Configuration Assistant logs at: /m01/midd/oms/cfgtoollogs/omsca

INFO: oracle.sysman.top.oms:Oracle Enterprise Manager 11g Release 1 Grid Control
INFO: oracle.sysman.top.oms:Copyright (c) 2009, 2010, Oracle. All rights reserved.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Enter Admin Server user password:
Enter Admin Server user password:Doing pre requisite checks ......
INFO: oracle.sysman.top.oms:Pre requisite checks completed successfully
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Doing infrastructure setup ......
INFO: oracle.sysman.top.oms:Infrastructure setup of EM completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Doing pre deployment operations ......
INFO: oracle.sysman.top.oms:Pre deployment of EM completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Deploying EM ......
INFO: oracle.sysman.top.oms:Deployment of EM completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Configuring webtier ......
INFO: oracle.sysman.top.oms:Configuring webTier completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Securing OMS ......
INFO: oracle.sysman.top.oms:EM Key is secured and is backed up at /m01/midd/oms/sysman/config/emkey.ora
INFO: oracle.sysman.top.oms:Adapter created successfully: emgc_USER
INFO: oracle.sysman.top.oms:Adapter created successfully: emgc_GROUP
INFO: oracle.sysman.top.oms:Post "Deploy and Repos Setup" operations completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Performing Post deploy operations ....
INFO: oracle.sysman.top.oms:Software Library OMS shared storage is not configured, skipping metadata registration
INFO: oracle.sysman.top.oms:Post deploy operations completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:EM configuration completed successfully.
INFO: oracle.sysman.top.oms:EM URL is:https://vrh5.oracle.com:7799/em
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:/m01/midd/oms/install/ocm/ocmInstance.txt (No such file or directory)
INFO: oracle.sysman.top.oms:Command for doing Self Update registration:
/m01/midd/oms/bin/emctl register oms metadata -service SelfUpdateEntityInstance
-file /m01/midd/oms/install/selfUpdate/agent_software_manifest.xml -core
INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0
INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2011 Oracle Corporation.  All rights reserved.
INFO: oracle.sysman.top.oms:SYSMAN password:
SYSMAN password:
Metadata registration successful
INFO: oracle.sysman.top.oms:Agent software entity instance registration to Self Update is successful.
INFO: oracle.sysman.top.oms:
 Check the OMS Configuration Assistant logs at: /m01/midd/oms/cfgtoollogs/omsca

INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in Plugins Deployment and Configuration
INFO: oracle.sysman.top.oms:The plug-in Plugins Deployment and Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.PluginCA
INFO: oracle.sysman.top.oms:Classpath = /m01/midd/oms/sysman/jlib/omsConfig.jar
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration
invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=6:microstep=0
INFO: oracle.sysman.top.oms:Fetcing ports from teh static ports file: /m01/midd/.gcinstall_temp/staticports.ini
INFO: oracle.sysman.top.oms:COMMAND: /m01/midd/oms/bin/pluginca
-oracleHome /m01/midd/oms -middlewareHome /m01/midd -action  deploy
-plugins oracle.sysman.db=12.1.0.1.0,oracle.sysman.xa=12.1.0.1.0,
oracle.sysman.emas=12.1.0.1.0,oracle.sysman.mos=12.1.0.1.0,
INFO: oracle.sysman.top.oms:pluginca - Plugin Configuration Tool
INFO: oracle.sysman.top.oms:Oracle Enterprise Manager 12c Release 1 Grid Control
INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.oms:Log file:
/m01/midd/oms/cfgtoollogs/pluginca/plugin_deployment_2011-10-17_08-10-26/configplugin_deploy_2011-10-17_08-10-26.log
INFO: oracle.sysman.top.oms:Trace file:
/m01/midd/oms/cfgtoollogs/pluginca/plugin_deployment_2011-10-17_08-10-26/configplugin_deploy_2011-10-17_08-10-26.trc
INFO: oracle.sysman.top.oms:Initializing PluginCA.
INFO: oracle.sysman.top.oms:Starting Deployment
INFO: oracle.sysman.top.oms:Invoking pre deploy callbacks.
INFO: oracle.sysman.top.oms:OMS state could be found. It is down
INFO: oracle.sysman.top.oms:Performing Midtier deconfig
INFO: oracle.sysman.top.oms:Performing Midtier config
INFO: oracle.sysman.top.oms:Performing Midtier update oh prop
INFO: oracle.sysman.top.oms:Performing Opss config
INFO: oracle.sysman.top.oms:Performing Post metadata registration
INFO: oracle.sysman.top.oms:Performing Post config module
INFO: oracle.sysman.top.oms:Invoking post deploy callbacks.
INFO: oracle.sysman.top.oms:Completed Deployment
INFO: oracle.sysman.top.oms:Checking file
/m01/midd/oms/sysman/install/undeployed_pluginswith name 12.1.0.1.0_oracle.sysman.vt_2000_0.opar
INFO: oracle.sysman.top.oms:Checking file
/m01/midd/oms/sysman/install/undeployed_pluginswith name 12.1.0.1.0_oracle.em.ssad_2000_0.opar
INFO: oracle.sysman.top.oms:Checking file
/m01/midd/oms/sysman/install/undeployed_pluginswith name 12.1.0.1.0_oracle.sysman.empa_2000_0.opar
INFO: oracle.sysman.top.oms:Checking file
/m01/midd/oms/sysman/install/undeployed_pluginswith name 12.1.0.1.0_oracle.em.sidb_2000_0.opar
INFO: oracle.sysman.top.oms:Checking file
/m01/midd/oms/sysman/install/undeployed_pluginswith name 12.1.0.1.0_oracle.sysman.emct_2000_0.opar
INFO: oracle.sysman.top.oms:Checking file
/m01/midd/oms/sysman/install/undeployed_pluginswith name 12.1.0.1.0_oracle.em.soee_2000_0.opar
INFO: oracle.sysman.top.oms:Checking file
/m01/midd/oms/sysman/install/undeployed_pluginswith name 12.1.0.1.0_oracle.sysman.ssa_2000_0.opar
INFO: oracle.sysman.top.oms:Checking file
/m01/midd/oms/sysman/install/undeployed_pluginswith name 12.1.0.1.0_oracle.sysman.emfa_2000_0.opar
INFO: oracle.sysman.top.oms:The plug-in Plugins Deployment and Configuration has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in Start Oracle Management Service
INFO: oracle.sysman.top.oms:The plug-in Start Oracle Management Service is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.StartOMS
INFO: oracle.sysman.top.oms:Classpath = /m01/midd/oms/sysman/jlib/omsConfig.jar:
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration
invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=9:microstep=0
INFO: oracle.sysman.top.oms:Fetcing ports from teh static ports file:
/m01/midd/.gcinstall_temp/staticports.ini
INFO: oracle.sysman.top.oms:Starting OMS ...
INFO: oracle.sysman.top.oms:Executing command: /m01/midd/oms/bin/emctl start oms
INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0
INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2011 Oracle Corporation.  All rights reserved.
INFO: oracle.sysman.top.oms:Starting WebTier...
INFO: oracle.sysman.top.oms:WebTier Successfully Started
INFO: oracle.sysman.top.oms:Starting Oracle Management Server...
INFO: oracle.sysman.top.oms:Oracle Management Server Successfully Started
INFO: oracle.sysman.top.oms:Oracle Management Server is Up
INFO: oracle.sysman.top.oms:Starting of OMS is successful.
INFO: oracle.sysman.top.oms:The plug-in Start Oracle Management Service has successfully been performed

 

OMS和Agent成功配置和启动后，会要求用户执行allroot.sh脚本

 

 

# /home/oem/oraInventory/orainstRoot.sh
Changing permissions of /home/oem/oraInventory
Adding read,write permissions for group,Removing read,write,execute permissions for world.
Changing groupname of /home/oem/oraInventory to oinstall.
The execution of the script is complete

 /m01/midd/oms/allroot.sh 

Starting to execute allroot.sh ......... 

Starting to execute /m01/midd/oms/root.sh ......
Running Oracle 11g root.sh script...

The following environment variables are set as:
    ORACLE_OWNER= oem
    ORACLE_HOME=  /m01/midd/oms

Enter the full pathname of the local bin directory: [/usr/local/bin]: 

   Copying dbhome to /usr/local/bin ...
   Copying oraenv to /usr/local/bin ...

   Copying coraenv to /usr/local/bin ...

Creating /etc/oratab file...

Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
/etc exist

Creating /etc/oragchomelist file...
/m01/midd/oms
Finished execution of  /m01/midd/oms/root.sh ......

Starting to execute /m01/midd/agent/core/12.1.0.1.0/root.sh ......
Finished product-specific root actions.
/etc exist
Finished execution of  /m01/midd/agent/core/12.1.0.1.0/root.sh ......

 

打开浏览器，输入地址https://hostname:7799/em(7799默认端口)访问EM Cloud Control 12c，输入sysman的身份认证

 

 

Accept License Agreement

 

 

首次登陆EM 会显示一个OverView页面：

 

 

 

使用如下命令停止OMS和Agent 服务:

 

#!/bin/bash
export OMS_HOME=/m01/midd/oms
export AGENT_HOME=/m01/midd/agent/core/12.1.0.1.0

$OMS_HOME/bin/emctl stop oms -all
$AGENT_HOME/bin/emctl stop agent

如
[oem@vrh5 ~]$ $OMS_HOME/bin/emctl stop oms -all
Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0  
Copyright (c) 1996, 2011 Oracle Corporation.  All rights reserved.
Stopping WebTier...
WebTier Successfully Stopped
Stopping Oracle Management Server...
Oracle Management Server Successfully Stopped
AdminServer Successfully Stopped
Oracle Management Server is Down
[oem@vrh5 ~]$ $AGENT_HOME/bin/emctl stop agent
Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0  
Copyright (c) 1996, 2011 Oracle Corporation.  All rights reserved.
Stopping agent ..... stopped.

 

使用如下命令启动OMS和Agent 服务:

 

#!/bin/bash
export OMS_HOME=/m01/midd/oms
export AGENT_HOME=/m01/midd/agent/core/12.1.0.1.0

$OMS_HOME/bin/emctl start oms

$AGENT_HOME/bin/emctl start agent

如
[oem@vrh5 ~]$ $OMS_HOME/bin/emctl start oms
Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0  
Copyright (c) 1996, 2011 Oracle Corporation.  All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server Successfully Started
Oracle Management Server is Up

[oem@vrh5 ~]$ $AGENT_HOME/bin/emctl start agent
Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0  
Copyright (c) 1996, 2011 Oracle Corporation.  All rights reserved.
Starting agent ............................. started.
Filed Under: Oracle, Oracle 12c新特性 Tagged With: , , , ,

EM dbconsole显示数据文件使用量为负数？

2011/10/14 by Leave a Comment

有网友在itpub上反应11g中查看EM dbconsole显示数据文件的使用量为负数,如图：

 

 

实际上导致(EM ( EM Home page -> Administration Tab -> Storage -> Datafiles ))显示负的使用量的Bug在11g和10g中均存在，这里将这些bug列出来以供参考:

 

10g Enterprise Manager Shows Negative Utilisation For An Oracle Datafile.

Applies to:
Oracle Server - Enterprise Edition - Version: 10.2.0.1 to 10.2.0.3
This problem can occur on any platform.
Symptoms

EM ( EM Home page -> Administration Tab -> Storage -> Datafiles ) shows negative 
utilization for some files. Value in Used (MB) column is negative.

Cause
This is because of Bug:5083393.

If the object is dropped and not purged, the value of FILE_ID / REL_FNO may be wrong in 
DBA_FREE_SPACE and this cause EM to display wrong value in Used (MB) column.

Solution
If available, download Patch:5083393 to resolve this issue.
Note that this patch is available on 10.2.0.2/10.2.0.3 for some platforms at the 
time of this writing this article (JULY 2007).

Workaround :
-------------
Purge all objects from the recycle bin.

$sqlplus "/as sysdba"
sql> purge dba_recyclebin 

Hdr: 5083393 10.1.0.4 RDBMS 10.1.0.4 SPACE PRODID-5 PORTID-912
Abstract: VALUE OF FILE_ID AND RELATIVE_FNO OF DBA_FREE_SPACE IS DIFFERENT

PROBLEM:
--------
When the table is dropped, the value of the FILE_ID column and
the RELATIVE_FNO column of dba_free_space might be different.

SQL> select * from dba_free_space where tablespace_name = 'TBS_TEST1';

TABLESPACE_NAME FILE_ID BLOCK_ID    BYTES BLOCKS RELATIVE_FNO
--------------- ------- -------- -------- ------ ------------
E
E
E
TBS_TEST1             6      105    65536      8            6
TBS_TEST1             6      113    65536      8            6
TBS_TEST1             6      121    65536      8            6
TBS_TEST1             6        9    65536      8            7   purge table tbs_test01;

Table purged.

SQL> select * from dba_free_space where tablespace_name = 'TBS_TEST1';

TABLESPACE_NAME FILE_ID BLOCK_ID    BYTES BLOCKS RELATIVE_FNO
--------------- ------- -------- -------- ------ ------------
TBS_TEST1             6        9   983040    120            6
TBS_TEST1             7        9   983040    120            7
TBS_TEST1             8        9 20905984   2552            8

In a word, there seems to be a problem in the display of an free space
concerning the segment that exists in RECYCLE BIN.

WORKAROUND:
-----------
None

RELATED BUGS:
-------------
None

REPRODUCIBILITY:
----------------
  100% (both In-house and Ct' site) 
  Rep?     Platform               RDBMS Ver. 
  -------  ---------------------  ---------- 
  Y(100%)  912 Intel Windows NT   10.1.0.4
  Y(100%)  912 Intel Windows NT   10.1.0.5
  Y(100%)  912 Intel Windows NT   10.2.0.2
  Y(100%)   46 Linux x86          10.1.0.4

 

11gR2 EMCONSOLE SHOWS NEGATIVE VALUES WHEN VIEWING DATAFILE USAGE SPACE IN 11.2.0.1

 

Hdr: 9868375 11.2.0.1 STORAGE 11.2.0.1 PRODID-1366 PORTID-226 9548105
Abstract: EMCONSOLE SHOWS NEGATIVE VALUES WHEN VIEWING DATAFILE USAGE SPACE IN 11.2.0.1

PROBLEM:
--------
The display of the usage of the data files (Tablespaces -> Datafiles) shows 
values in the range negative. The fill rate is not shown correctly.

This is the same exact issue as explained in note 559414.1 but on top of 
11.2.0.1 and also the issue does not seem fixed when trying the workaround by 
clearing the recycle bin or by turning it off.

DIAGNOSTIC ANALYSIS:
--------------------
Checked running the statements from sqlplus they provided the correct value 
and checked this Bug 5549540 seems it should have been fixed in 11G but still 
having the same issue.

WORKAROUND:
-----------
To run the statements and check the data file usage from sqlplus.

 

11gR1 Grid Control Shows Duplicate Datafile Names Multiple times (Some With Negative Values) When Drilling Onto Tablespace Link

Applies to:
Enterprise Manager Grid Control - Version: 10.2.0.5 to 11.1.0.1 - Release: 10.2 to 11.1
Information in this document applies to any platform.
Symptoms

The list of datafiles displayed for a tablespace in EM Grid Control is wrong, so that some 
datafiles are listed repeatedly multiple times, and some of the sizes are wrong and showing a negative value.

This is seen from database home page => server tab => tablespaces.
Click on tablespace name, a list of datafiles associated with that tablespace should be returned.

Cause
If the SQL statement which Grid Control uses is run manually at Sqlplus, the same output of the 
same datafile listed multiple times can also be seen. 

Here you have the SQL statement launched by the Grid Control to collect the list of datafiles :

SELECT d.file_name, TO_CHAR((d.bytes / 1024 / 1024), '99999990.000'), 
NVL(TO_CHAR(((d.bytes - s.bytes) / 1024 / 1024), '99999990.000'), TO_CHAR((d.bytes / 1024 / 1024), '99999990.000')), 
d.file_id, d.autoextensible, d.increment_by, d.maxblocks FROM sys.dba_data_files d, 
(SELECT file_id, SUM(bytes) bytes FROM sys.dba_free_space WHERE tablespace_name = '&tablespaceName' 
GROUP BY file_id) s WHERE (s.file_id (+)= d.file_id) AND (d.tablespace_name = '&tablespaceName')

This is the issue described in following bug :

Bug 8499373 GRID CONTROL SHOWS SAME DATAFILE NAME REPEATEDLY WHEN DRILL INTO A TABLESPACE

This bug is actually closed as a duplicate of a database bug Bug 8570838 WRONG RESULTS FOR QUERY AGAINST 
DBA_DATA_FILES IN 10.2.0.4
The root cause of the database bug is :
Bug 7155655 Intermittent Wrong Results/Plan Instability from Join Predicate Push Down (JPPD)

Solution

Apply the Patch 7155655. 

Note :
Depending on platform it may be necessary to apply a merge patch for this - eg. in some cases it was 
necessary to apply Patch 7278117.

Hdr: 9748363 11.2.0.1 STORAGE 11.1.0.1 PRODID-1366 PORTID-226 9548105
Abstract: NEGATIVE VALUES REPORTED BY GRIDCONTROLFOR TABLESPACE WITH AT LEAST TWO DATAFILE

*** 05/25/10 09:46 am ***
TAR
---
3-1772640611

Problem Description
-------------------
The Used (MB) column on the datafiles summary webpage in the 11.2 grid 
control 
shows negative values for a tablespace containing at least two datafiles

Environment Information
-----------------------

Test Case Step-by-Step Instructions
-----------------------------------

Test Case Location
------------------

Diagnostic Analysis
-------------------
This is the same as bug 9548105 except for this is for GridControl vs 
dbconsole.
SELECT d.file_name, TO_CHAR((d.bytes / 1024 / 1024), '99999990.000'),
NVL(TO_CHAR(((d.bytes - s.bytes) / 1024 / 1024), '99999990.000'),
TO_CHAR((d.bytes / 1024/ 1024), '99999990.000')), d.file_id, 
d.autoextensible,
d.increment_by, d.maxblocks FROM sys.dba_data_files d,  
(SELECT ts.name tablespace_name, SUM(e.length * ts.blocksize) bytes  
FROM sys.fet$ e, sys.ts$ ts  WHERE ts.ts# = e.ts# GROUP BY ts.name  
UNION ALL  SELECT ts.name tablespace_name, SUM(e.blocks * ts.blocksize) bytes 

FROM sys.dba_lmt_free_space e, sys.ts$ ts  WHERE ts.ts# = e.tablespace_id 
GROUP BY ts.name) s
WHERE (s.tablespace_name = d.tablespace_name) AND (d.tablespace_name = :1)

Performance
-----------

NLS Information
---------------

-------

Log Files Location
------------------

Reproducibility
---------------
yes

URL
---

Did you test with the latest version?
-------------------------------------

Available Workarounds
---------------------
none

Related Bugs
------------
9548105
Filed Under: Oracle, Oracle Bug Tagged With: , , , , ,

Enterprise Manager Cloud Control 12.1.0.1 (12c)安装指南

2011/10/04 by Leave a Comment

This document describes in detail the Steps for Installing Enterprise Manager Cloud Control in graphical mode. You can also refer to Enterprise Manager 12c Basic Installation Guide on OTN from the following link:
 Oracle Enterprise Manager Cloud Control Basic Installation Guide 12c Release 1 (12.1.0.1)

For installing Enterprise Manager 12c Agents, refer to Document 1360183.1

This document does NOT cover the procedure for Upgrading your existing Enterprise Manager system. To upgrade your system to Enterprise Manager 12c, refer to the following EM 12c Upgrade My Oracle Support notes and OTN documentation:

 Oracle Enterprise Manager Cloud Control Upgrade Guide 12c Release 1 (12.1.0.1)

 

How to install enterprise manager cloud control 12.1.0.1 (12c)

View more documents from Maclean Liu

Filed Under: Oracle, Oracle 12c新特性 Tagged With: , , ,

如何在windows vista/2008/7中 安装Oracle OMS 即Grid Control

2009/11/04 by Leave a Comment

之前因为考试的原因，希望能在本机的windows上安装 Oracle OMS 以方便练习，OCM考试中使用的Grid Control 版本为10.2.0.1, 仅支持Windows相关系统号5,对于6或6.1的vista/2008/7安装过程中都会遇到问题无法解决，最为明显的是10.2.0.1自带数据库为10.1.0.4版本在windows相关版本号6以上的平台中均无法创建数据库。Oracle OCM考试中会要求你使用DBCA 建立一个干净的Customer定制数据库，仅需要建立必要的试图和过程（catalog.sql与catproc.sql运行过）并带有label security 组件（其他如Spatial与OLAP组建包括Oracle JVM等均不需要），如图：

labelsecurity

Oracle Grid Control 的10.2.0.5版本已经发布，其中10.2.0.4版本已支持最新的Windows操作系统，但只有patch install版本而无直接安装的full install 版本，且直接安装10.2.0.1 版本在OMS configuration部分将出错导致配置失败故我们需要另一种安装方式，如文档 ID:     763072.1

Installing On Windows 2008/Vista

The following sections discuss installing Enterprise Manager 10g Grid Control on Windows 2008/Vista.

Installing Enterprise Manager 10g Grid Control Using A New Database On Windows 2008/Vista

Enterprise Manager 10g Grid Control will not support the New Database install option on Windows 2008/Vista as the Database 10.1.0.4 (which is the default Database for Grid Control) is not supported for Windows 2008/Vista.

Installing Enterprise Manager 10g Grid Control Using an Existing Database On Windows 2008/Vista

To install Enterprise Manager 10g Grid Control using an existing database on Windows 2008/Vista, follow these steps:

  1. Download the fixed OUI 10204 from ARU Microsoft Windows (32-bit) (Bug 6640752) and extract it to a designated location, for example, C:OUI_Shiphome
  2. Copy Enterprise Manager 10g Grid Control 10.2.0.2.0 base shiphome (Disk1) into a location, for example, C:EMGC_102020shiphome
  3. Install the database that supports Vista/2008, such as 10.2.0.3.0/10.2.0.4. Make the following changes in the response file:

    C:EMGC_Shiphome102020shiphomeDisk1installresponseemnoseed.rsp

    1. Give the absolute path of products.xml for the FROM_LOCATION parameter.

      FROM_LOCATION="C:EMGC_102020shiphomeDisk1/oms/Disk1/stage/products.xml"

    2. Give the OMS Oracle Home location. For example:

      ORACLE_HOME=c:emnoseedoms10g

    3. Give the Oracle Home name. For example:

      ORACLE_HOME_NAME=oms10g12

    4. Give the Agent Oracle Home location. For example:

      s_agentHome=c:emnoseedagent10g

    5. Give the Agent Home Name. For example:

      s_agentHomeName=agent10g12

    Note:

    Ensure that the Oracle Home location and name are not identical to any previous Homes.

  4. Invoke the setup.exe for Install in the following way:

    C:OUI_ShiphomecdDisk1installsetup.exe -ignoreDiskLabel -responseFile C:EMGC_102020shiphomeDisk1installresponseemnoseed.rsp

  5. If the Agent is not coming up, and if the value of agentTZRegion in emd.properties is GMT then do the following:
    1. Reset TimeZone on Agent box to GMT.
    2. Execute the following command in <Oracle home of Agent>BIN>emctl resetTZ agent
  6. Patch OMS and Agent to version 10.2.0.5.

Installing An Additional Management Service On Windows 2008/Vista

Follow the below instructions to install an additional Management Service on Windows 2008/Vista.

  1. Download the fixed OUI 10204 from ARU Microsoft Windows (32-bit) (Bug 6640752) and extract it to a designated location, for example, C:OUI_Shiphome
  2. Copy Enterprise Manager 10g Grid Control 10.2.0.2.0 base shiphome (Disk1) into a location, for example, C:EMGC_102020shiphome
  3. Make the following changes in the response file:

    C:EMGC_102020shiphomeDisk1installresponseoms.rsp

    1. Supply the absolute path of products.xml for FROM_LOCATION parameter.

      FROM_LOCATION="C:EMGC_102020shiphome/Disk1/oms/Disk1/stage/products.xml"

    2. Supply the OMS Oracle Home location. For example: ORACLE_HOME=C:OH102020oms10g
    3. Specify the Oracle Home name. For example, ORACLE_HOME_NAME=oms10g20
    4. Supply the Agent Oracle Home location. For example, s_agentHome=C:OH102020agent10g
    5. Supply the Agent Home Name. For example, s_agentHomeName=agent10g20

    Note:

    Ensure that the Oracle Home location and name not be the same as any previous homes.

  4. Invoke the setup.exe for Install in the following way:

    C:OUI_ShiphomecdDisk1installsetup.exe -ignoreDiskLabel -responseFile

    C:EMGC_102020shiphomeDisk1installresponseoms.rsp

  5. If the Agent does not come up, and if the value of agentTZRegion in emd.properties is GMT, then do the following:
    1. Reset TimeZone on the Agent installation box to GMT
    2. Execute the following command in <Oracle home of Agent>BIN>emctl resetTZ agent
  6. Patch OMS and Agent to version 10.2.0.5.

Installing An Additional Management Agent On Windows 2008/Vista

Follow the below instructions to install an additional Management Agent on Windows 2008/Vista.

  1. Download the fixed OUI 10204 from ARU Microsoft Windows (32-bit) (Bug 6640752) and extract it to a designated location, for example, C:OUI_Shiphome
  2. Copy Enterprise Manager 10g Grid Control 10.2.0.2.0 base shiphome (Disk1) into a location, for example, C:EMGC_102020shiphome
  3. Make the following changes in the response file:

    C:EMGC_102020shiphomeDisk1installresponseagent.rsp

    1. Supply the absolute path of products.xml for FROM_LOCATION parameter.

      FROM_LOCATION="C:EMGC_102020shiphomeDisk1/oms/Disk1/stage/products.xml"

    2. Supply the OMS Oracle Home location. For example, ORACLE_HOME=c:agtagent10g
    3. Supply the Oracle Home name. For example, ORACLE_HOME_NAME=agent10g13

    Note:

    Ensure that Oracle Home location and name are not the same as any previous homes.

  4. Invoke the setup.exe for Install in the following way:

    C:OUI_ShiphomecdDisk1installsetup.exe -ignoreDiskLabel -responseFile

    C:EMGC_102020shiphomeDisk1installresponseagent.rsp

  5. If the Agent is not coming up, and if the value of agentTZRegion in emd.properties is GMT then do the following:
    1. Reset TimeZone on the Agent installation box to GMT.
    2. Execute the following command in <Oracle home of Agent>BIN>emctl resetTZ agent

Patch Agent to version 10.2.0.5.

Filed Under: Oracle Tagged With: , , , , , , , , , , ,

沪ICP备14014813号-2

沪公网安备 31010802001379号