了解真实的Oracle unbreakable database appliance
View more documents from Maclean Liu
Oracle Sun Exadata V2 ,X2-2,X2-8 主要配置对比
2011/09/14 by Leave a Comment
| v2 Full Rack | x2-2 Full Rack | x2-8 Full Rack | |
| Database servers | 8 x Sun Fire x4170 1U | 8 x Sun Fire x4170 M2 1U | 2 x Sun Fire x4800 5U |
| Database CPUs | Xeon E5540 quad core 2.53GHz | Xeon X5670 six cores 2.93GHz | Xeon X7560 eight cores 2.26GHz |
| database cores | 64 | 96 | 128 |
| database RAM | 576GB | 768GB | 2TB |
| Storage cells | 14 x SunFire X4275 | 14 x SunFire X4270 M2 | 14 x SunFire X4270 M2 |
| storage cell CPUs | Xeon E5540 quad core 2.53GHz | Xeon L5640 six cores 2.26GHz | Xeon L5640 six cores 2.26GHz |
| storage cells CPU cores | 112 | 168 | 168 |
| IO performance & capacity | 15K RPM 600GB SAS or 2TB SATA 7.2K RPM disks | 15K RPM 600GB SAS (HP model – high performance) or 2TB SAS 7.2K RPM disks (HC model – high capacity) | 15K RPM 600GB SAS (HP model – high performance) or 2TB SAS 7.2K RPM disks (HC model – high capacity) |
| Note that 2TB SAS are the same old 2 TB drives with new SAS electronics. (Thanks Kevin Closson for ref) | Note that 2TB SAS are the same old 2 TB drives with new SAS electronics. (Thanks Kevin Closson for ref) | ||
| Flash Cache | 5.3TB | 5.3TB | 5.3TB |
| Database Servers networking | 4 x 1GbE x 8 servers = 32 x 1GbE | 4 x 1GbE x 8 servers + 2 x 10GbE x 8 servers = 32 x 1Gb + 16 x 10GbEE | 8 x 1GbE x 2 servers + 8 x 10GbE x 2 servers = 16 x 1Gb + 16 x 10GbEE |
| InfiniBand Switches | QDR 40Gbit/s wire | QDR 40Gbit/s wire | QDR 40Gbit/s wire |
| InfiniBand ports on database servers (total) | 2 ports x 8 servers = 16 ports | 2 ports x 8 servers = 16 ports | 8 ports x 2 servers = 16 ports |
| Database Servers OS | Oracle Linux only | Oracle Linux (possible Solaris later, still unclear) | Oracle Linux or Solaris x86 |
一些我们需要知道的时间指标
2011/05/08 by Leave a Comment
- L1 cache reference 0.5 ns
- Branch mispredict 5 ns
- L2 cache reference 7 ns
- Mutex lock/unlock 100 ns
- Main memory reference 100 ns
- Compress 1K bytes with Zippy 10,000 ns
- Send 2K bytes over 1 Gbps network 20,000 ns
- Read 1 MB sequentially from memory 250,000 ns
- Round trip within same datacenter 500,000 ns
- Disk seek 10,000,000 ns
- Read 1 MB sequentially from network 10,000,000 ns
- Read 1 MB sequentially from disk 30,000,000 ns
- Send packet CA->Netherlands->CA 150,000,000 ns
Reference:http://surana.wordpress.com/2009/01/01/numbers-everyone-should-know/
Exadata Server Hardware Details
2010/06/16 by 1 Comment
Exadata Server Hardware Details:
[oracle@maclean01 ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5540 @ 2.53GHz
stepping : 5
cpu MHz : 2527.101
cache size : 8192 KB
physical id : 0
siblings : 8
core id : 0
cpu cores : 4
apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm syscall nx rdtscp lm constant_tsc ida nonstop_tsc pni monitor
ds_cpl vmx est tm2 cx16 xtpr popcnt lahf_lm
bogomips : 5057.83
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: [8]
[oracle@maclean01 ~]$ cat /proc/meminfo
MemTotal: 74027752 kB
MemFree: 3911016 kB
Buffers: 842416 kB
Cached: 48064504 kB
SwapCached: 4984 kB
Active: 46733632 kB
Inactive: 10013672 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 74027752 kB
LowFree: 3911016 kB
SwapTotal: 16771852 kB
SwapFree: 16617108 kB
Dirty: 25944 kB
Writeback: 0 kB
AnonPages: 7832000 kB
Mapped: 29202808 kB
Slab: 1834104 kB
PageTables: 11127904 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 53785728 kB
Committed_AS: 49850764 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 290128 kB
VmallocChunk: 34359447675 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
Hugepagesize: 2048 kB
[oracle@maclean01 ~]$ cat /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 1
# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 4294967296
########### BEGIN DO NOT REMOVE Added by Oracle Exadata ###########
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
# bug 8311668 file-max and aio-max-nr
fs.file-max = 6815744
# DB install guide says the above
fs.aio-max-nr = 1048576
# 8976963
net.ipv4.neigh.bond0.locktime=0
net.ipv4.ip_local_port_range = 9000 65500
# DB install guide says the above
net.core.rmem_default = 4194304
net.core.wmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_max = 2097152
# The original DB deployment was net.core.wmem_max = 1048586 but IB works
# best for Exadata at the above net.core settings
# bug 8268393 remove vm.nr_hugepages = 2048
# bug 8778821 system reboots after 60 sec on panic
kernel.panic=60
########### END DO NOT REMOVE Added by Oracle Exadata ###########
########### BEGIN DO NOT REMOVE Added by Oracle Exadata ###########
kernel.shmmax = 64547735961
kernel.shmall = 15758724
########### END DO NOT REMOVE Added by Oracle Exadata ###########
[oracle@maclean01 ~]$ cat /etc/security/limits.conf
# /etc/security/limits.conf
#
#Each line describes a limit for a user in the form:
#
#
#
#Where:
# can be:
# - an user name
# - a group name, with @group syntax
# - the wildcard *, for default entry
# - the wildcard %, can be also used with %group syntax,
# for maxlogin limit
#
# can have the two values:
# - "soft" for enforcing the soft limits
# - "hard" for enforcing hard limits
#
# can be one of the following:
# - core - limits the core file size (KB)
# - data - max data size (KB)
# - fsize - maximum filesize (KB)
# - memlock - max locked-in-memory address space (KB)
# - nofile - max number of open files
# - rss - max resident set size (KB)
# - stack - max stack size (KB)
# - cpu - max CPU time (MIN)
# - nproc - max number of processes
# - as - address space limit
# - maxlogins - max number of logins for this user
# - maxsyslogins - max number of logins on the system
# - priority - the priority to run user process with
# - locks - max number of file locks the user can hold
# - sigpending - max number of pending signals
# - msgqueue - max memory used by POSIX message queues (bytes)
# - nice - max nice priority allowed to raise to
# - rtprio - max realtime priority
#
#
#
#* soft core 0
#* hard rss 10000
#@student hard nproc 20
#@faculty soft nproc 20
#@faculty hard nproc 50
#ftp hard nproc 0
#@student - maxlogins 4
########### BEGIN DO NOT REMOVE Added by Oracle Deployment Scripts ###########
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 65536
oracle hard nofile 65536
########### END DO NOT REMOVE Added by Oracle Deployment Scripts ###########
# End of file
[oracle@maclean01 ~]$ cat /etc/hosts
### Only consider using this file if the customer does not have any DNS
# If the customer has DNS DO NOT USE THIS FILE
# you will have to decide on which scan address to uncomment - choose only 1
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
### Compute Node [eth0] Interface details
### Compute Node Client Access [bond1] Interface details
### Compute Node Client Access VIP [bond1] Interface details
### Compute Node Client Access SCAN [bond1] Interface details
### Cell Node Admin [eth0] Interface details
### Compute and Cell ILOM [ilom] Interface details
### Switches on Admin [eth0] Network
### Compute Node Private Interface details
### CELL Node Private Interface details
### Compute Node Private Interface details
### CELL Node Private Interface details
### Switch details
# The following 5 IP addresses are for reference only. You may
# not be able to reach these IP addresses from this machine
[oracle@maclean01 ~]$ /sbin/lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:02.0 PCI bridge: Intel Corporation X58 I/O Hub PCI Express Root Port 2 (rev 13)
00:03.0 PCI bridge: Intel Corporation X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:09.0 PCI bridge: Intel Corporation X58 I/O Hub PCI Express Root Port 9 (rev 13)
00:13.0 PIC: Intel Corporation X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13)
00:14.0 PIC: Intel Corporation X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation X58 I/O Hub Control Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation X58 I/O Hub Throttle Registers (rev 13)
00:16.0 System peripheral: Intel Corporation X58 Chipset QuickData Technology Device (rev 13)
00:16.1 System peripheral: Intel Corporation X58 Chipset QuickData Technology Device (rev 13)
00:16.2 System peripheral: Intel Corporation X58 Chipset QuickData Technology Device (rev 13)
00:16.3 System peripheral: Intel Corporation X58 Chipset QuickData Technology Device (rev 13)
00:16.4 System peripheral: Intel Corporation X58 Chipset QuickData Technology Device (rev 13)
00:16.5 System peripheral: Intel Corporation X58 Chipset QuickData Technology Device (rev 13)
00:16.6 System peripheral: Intel Corporation X58 Chipset QuickData Technology Device (rev 13)
00:16.7 System peripheral: Intel Corporation DMA Engine (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
01:00.0 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02)
01:00.1 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02)
07:00.0 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02)
07:00.1 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02)
0d:00.0 RAID bus controller: LSI Logic / Symbios Logic Unknown device 0079 (rev 03)
19:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX IB QDR, PCIe 2.0 5GT/s] (rev a0)
1f:05.0 VGA compatible controller: ASPEED Technology, Inc. AST2000 (rev 10)
[oracle@maclean01 ~]$ uname -a
Linux maclean01.shmcc.com 2.6.18-128.1.16.0.1.el5 #1 SMP Tue Jun 30 16:48:30 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@maclean01 ~]$ uname -r
2.6.18-128.1.16.0.1.el5
[oracle@maclean01 ~]$ /sbin/lsusb
Bus 003 Device 006: ID 046b:ff10 American Megatrends, Inc.
Bus 003 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 005 Device 002: ID 0624:0307 Avocent Corp.
Bus 004 Device 001: ID 0000:0000
Bus 008 Device 001: ID 0000:0000
Bus 008 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 006 Device 001: ID 0000:0000
Bus 007 Device 009: ID 046b:ff01 American Megatrends, Inc.
Bus 007 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
[oracle@maclean01 ~]$ dmesg
Linux version 2.6.18-128.1.16.0.1.el5 (mockbuild@ca-build9.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Tue Jun 30 16:48:30 EDT 2009
Command line: root=LABEL=oracle ro bootarea=oracle rhgb debug console=ttyS0,115200n8 console=tty1 crashkernel=128M@16M numa=off
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f780000 (usable)
BIOS-e820: 000000007f78e000 - 000000007f790000 type 9
BIOS-e820: 000000007f790000 - 000000007f79e000 (ACPI data)
BIOS-e820: 000000007f79e000 - 000000007f7d0000 (ACPI NVS)
BIOS-e820: 000000007f7d0000 - 000000007f7e0000 (reserved)
BIOS-e820: 000000007f7ec000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000001280000000 (usable)
DMI present.
ACPI: RSDP (v002 SUN ) @ 0x00000000000fa3e0
ACPI: XSDT (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790100
ACPI: FADT (v004 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790290
ACPI: MADT (v002 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790390
ACPI: MCFG (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f7904c0
ACPI: SLIT (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790500
ACPI: SPMI (v005 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790530
ACPI: OEMB (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79e040
ACPI: HPET (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79a580
ACPI: DMAR (v001 SUN Xxx70 0x00000001 MSFT 0x00000097) @ 0x000000007f79e100
ACPI: SRAT (v001 SUN Xxx70 0x00000001 INTC 0x00000001) @ 0x000000007f79a5c0
ACPI: SSDT (v001 SUN Xxx70 0x00000012 INTL 0x20051117) @ 0x000000007f7a32b0
ACPI: EINJ (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79a790
ACPI: BERT (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79a920
ACPI: ERST (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79a950
ACPI: HEST (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79ab00
ACPI: DSDT (v002 SUN Xxx70 0x00000002 INTL 0x20051117) @ 0x0000000000000000
NUMA turned off
Faking a node at 0000000000000000-0000001280000000
Bootmem setup node 0 0000000000000000-0000001280000000
On node 0 totalpages: 18605538
DMA zone: 2602 pages, LIFO batch:0
DMA32 zone: 503736 pages, LIFO batch:31
Normal zone: 18099200 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Processor #4 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Processor #6 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled)
Processor #16 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
Processor #18 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled)
Processor #20 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
Processor #22 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
Processor #1 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
Processor #3 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled)
Processor #5 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] enabled)
Processor #7 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled)
Processor #17 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
Processor #19 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x15] enabled)
Processor #21 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled)
Processor #23 7:10 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to clustered
ACPI: HPET id: 0xffffffff base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009a000 - 000000000009b000
Nosave address range: 000000000009b000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 000000007f780000 - 000000007f78e000
Nosave address range: 000000007f78e000 - 000000007f790000
Nosave address range: 000000007f790000 - 000000007f79e000
Nosave address range: 000000007f79e000 - 000000007f7d0000
Nosave address range: 000000007f7d0000 - 000000007f7e0000
Nosave address range: 000000007f7e0000 - 000000007f7ec000
Nosave address range: 000000007f7ec000 - 0000000080000000
Nosave address range: 0000000080000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ffb00000
Nosave address range: 00000000ffb00000 - 0000000100000000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 16 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 18605538
Kernel command line: root=LABEL=oracle ro bootarea=oracle rhgb debug console=ttyS0,115200n8
console=tty1 crashkernel=128M@16M numa=off
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x150a1000 - 0x190a1000
Memory: 74025464k/77594624k available (2499k kernel code, 1462896k reserved, 1261k data, 200k init)
Calibrating delay using timer specific routine.. 5057.83 BogoMIPS (lpj=2528915)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 3398092
Detected 3.398 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/16 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 5053.96 BogoMIPS (lpj=2526984)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 2/16 APIC 0x4
Initializing CPU#2
Calibrating delay using timer specific routine.. 5053.97 BogoMIPS (lpj=2526986)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 3/16 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 5053.89 BogoMIPS (lpj=2526948)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 4/16 APIC 0x10
Initializing CPU#4
Calibrating delay using timer specific routine.. 5054.01 BogoMIPS (lpj=2527005)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU4: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 5/16 APIC 0x12
Initializing CPU#5
Calibrating delay using timer specific routine.. 5054.01 BogoMIPS (lpj=2527007)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU5: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 6/16 APIC 0x14
Initializing CPU#6
Calibrating delay using timer specific routine.. 5054.01 BogoMIPS (lpj=2527008)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU6: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 7/16 APIC 0x16
Initializing CPU#7
Calibrating delay using timer specific routine.. 5054.02 BogoMIPS (lpj=2527010)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU7: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 8/16 APIC 0x1
Initializing CPU#8
Calibrating delay using timer specific routine.. 5054.00 BogoMIPS (lpj=2527002)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU8: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 9/16 APIC 0x3
Initializing CPU#9
Calibrating delay using timer specific routine.. 5054.01 BogoMIPS (lpj=2527005)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU9: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 10/16 APIC 0x5
Initializing CPU#10
Calibrating delay using timer specific routine.. 5054.01 BogoMIPS (lpj=2527006)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU10: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 11/16 APIC 0x7
Initializing CPU#11
Calibrating delay using timer specific routine.. 5054.01 BogoMIPS (lpj=2527006)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU11: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 12/16 APIC 0x11
Initializing CPU#12
Calibrating delay using timer specific routine.. 5054.04 BogoMIPS (lpj=2527023)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU12: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 13/16 APIC 0x13
Initializing CPU#13
Calibrating delay using timer specific routine.. 5054.01 BogoMIPS (lpj=2527008)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU13: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 14/16 APIC 0x15
Initializing CPU#14
Calibrating delay using timer specific routine.. 5054.01 BogoMIPS (lpj=2527009)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU14: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 15/16 APIC 0x17
Initializing CPU#15
Calibrating delay using timer specific routine.. 5053.94 BogoMIPS (lpj=2526973)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU15: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
Brought up 16 CPUs
testing NMI watchdog ... OK.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2527.101 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=240 bytes
migration_cost=2,22,1217
checking if image is initramfs... it is
Freeing initrd memory: 2086k freed
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
Boot video device is 0000:1f:05.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
PCI-GART: No AMD northbridge found.
pnp: 00:0a: ioport range 0x400-0x41f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: b000-bfff
MEM window: fac00000-facfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: c000-cfff
MEM window: fad00000-fadfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: d000-dfff
MEM window: fae00000-faefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: faf00000-faffffff
PREFETCH window: f9800000-f9ffffff
PCI: Ignore bogus resource 6 [0:0] of 0000:1f:05.0
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: fb000000-fbefffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1290102048.642:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 105B9C4057F6D166
- User ID: Oracle USA, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie01]
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie01]
PCI: Setting latency timer of device 0000:00:09.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
Allocate Port Service[0000:00:09.0:pcie01]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P002Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P002Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P003Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P003Cst] [20060707]
ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P004Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P004Cst] [20060707]
ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P005Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P005Cst] [20060707]
ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P006Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P006Cst] [20060707]
ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P007Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P007Cst] [20060707]
ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P008Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P008Cst] [20060707]
ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P009Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P009Cst] [20060707]
ACPI: CPU8 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P010Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P010Cst] [20060707]
ACPI: CPU9 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P011Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P011Cst] [20060707]
ACPI: CPU10 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P012Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P012Cst] [20060707]
ACPI: CPU11 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P013Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P013Cst] [20060707]
ACPI: CPU12 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P014Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P014Cst] [20060707]
ACPI: CPU13 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P015Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P015Cst] [20060707]
ACPI: CPU14 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P016Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P016Cst] [20060707]
ACPI: CPU15 (power states: C1[C1] C2[C2] C3[C3])
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S5)
Freeing unused kernel memory: 200k freed
Write protecting the kernel read-only data: 483k
USB Universal Host Controller Interface driver v3.0
GSI 16 sharing vector 0xD9 and IRQ 16
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 217, io base 0x0000a800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 17 sharing vector 0xE1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 225, io base 0x0000a880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 18 sharing vector 0xE9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 233, io base 0x0000ac00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 19 sharing vector 0x32 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 50, io base 0x0000a080
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 233, io base 0x0000a400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
GSI 20 sharing vector 0x3A and IRQ 20
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 58, io base 0x0000a480
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 58, io mem 0xfabde000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
usb 2-1: USB disconnect, address 2
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 50, io mem 0xfabdc000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
SCSI subsystem initialized
megasas: 00.00.04.17 Tues. Sep. 15, 11:41:51 PST 2009
megasas: 0x1000:0x0079:0x1000:0x9263: bus 13:slot 0:func 0
GSI 21 sharing vector 0x42 and IRQ 21
ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 24 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:0d:00.0 to 64
gen2: instance->base_addr = faefc000<6>megasas: FW now in Ready state
megasas: max_sectors : 0x280, cmd_per_lun : 0x80
scsi0 : LSI Logic SAS based MegaRAID driver
Vendor: HITACHI Model: H103014SCSUN146G Rev: A2A8
Type: Direct-Access ANSI SCSI revision: 06
Vendor: HITACHI Model: H103014SCSUN146G Rev: A2A8
Type: Direct-Access ANSI SCSI revision: 06
Vendor: HITACHI Model: H103014SCSUN146G Rev: A2A8
Type: Direct-Access ANSI SCSI revision: 06
Vendor: HITACHI Model: H103014SCSUN146G Rev: A2A8
Type: Direct-Access ANSI SCSI revision: 06
Vendor: LSI Model: MR9261-8i Rev: 2.0.
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 570310656 512-byte hdwr sectors (291999 MB)
sda: Write Protect is off
sda: Mode Sense: 1f 00 00 08
SCSI device sda: drive cache: write back, no read (daft)
SCSI device sda: 570310656 512-byte hdwr sectors (291999 MB)
sda: Write Protect is off
sda: Mode Sense: 1f 00 00 08
SCSI device sda: drive cache: write back, no read (daft)
sda: sda1 sda2 sda3
sd 0:2:0:0: Attached scsi disk sda
HP CISS Driver (v 3.6.20)
libata version 3.00 loaded.
Initializing USB Mass Storage driver...
usb 7-3: new high speed USB device using ehci_hcd and address 2
usb 7-3: configuration #1 chosen from 1 choice
hub 7-3:1.0: USB hub found
hub 7-3:1.0: 2 ports detected
usb 8-3: new high speed USB device using ehci_hcd and address 2
usb 8-3: configuration #1 chosen from 1 choice
hub 8-3:1.0: USB hub found
hub 8-3:1.0: 4 ports detected
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input0
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input1
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
usb 5-2: new low speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
input: Avocent Avocent DSRIQ-USB as /class/input/input2
input: USB HID v1.10 Keyboard [Avocent Avocent DSRIQ-USB] on usb-0000:00:1d.1-2
input: Avocent Avocent DSRIQ-USB as /class/input/input3
input: USB HID v1.10 Mouse [Avocent Avocent DSRIQ-USB] on usb-0000:00:1d.1-2
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1290102078.790:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input4
mlx4_core: Mellanox ConnectX core driver v1.0 (April 4, 2008)
mlx4_core: Initializing 0000:19:00.0
GSI 22 sharing vector 0x4A and IRQ 22
ACPI: PCI Interrupt 0000:19:00.0[A] -> GSI 32 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:19:00.0 to 64
Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2ora
Copyright (c) 2008 Intel Corporation.
mlx4_core 0000:19:00.0: Only 10 MSI-X vectors available, need 17. Trying again
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233
mlx4_ib: Mellanox ConnectX InfiniBand driver v1.0 (April 4, 2008)
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfabd8000 port 0xfabd8100 irq 162
ata2: SATA max UDMA/133 abar m2048@0xfabd8000 port 0xfabd8180 irq 162
ata3: SATA max UDMA/133 abar m2048@0xfabd8000 port 0xfabd8200 irq 162
ata4: SATA max UDMA/133 abar m2048@0xfabd8000 port 0xfabd8280 irq 162
ata5: SATA max UDMA/133 abar m2048@0xfabd8000 port 0xfabd8300 irq 162
ata6: SATA max UDMA/133 abar m2048@0xfabd8000 port 0xfabd8380 irq 162
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
GSI 23 sharing vector 0xAA and IRQ 23
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 58
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 28 (level, low) -> IRQ 170
PCI: Setting latency timer of device 0000:01:00.0 to 64
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:unknown) 00:21:28:6b:02:50
igb 0000:01:00.0: eth0: PBA No: 2030ff-0ff
igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 24 sharing vector 0xE2 and IRQ 24
ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 40 (level, low) -> IRQ 226
PCI: Setting latency timer of device 0000:01:00.1 to 64
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:unknown) 00:21:28:6b:02:51
igb 0000:01:00.1: eth1: PBA No: 2030ff-0ff
igb 0000:01:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 25 sharing vector 0x5B and IRQ 25
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 29 (level, low) -> IRQ 91
PCI: Setting latency timer of device 0000:07:00.0 to 64
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth2: (PCIe:2.5Gb/s:unknown) 00:21:28:6b:02:52
igb 0000:07:00.0: eth2: PBA No: 2030ff-0ff
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 26 sharing vector 0x93 and IRQ 26
ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 41 (level, low) -> IRQ 147
PCI: Setting latency timer of device 0000:07:00.1 to 64
sd 0:2:0:0: Attached scsi generic sg0 type 0
igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.1: eth3: (PCIe:2.5Gb/s:unknown) 00:21:28:6b:02:53
igb 0000:07:00.1: eth3: PBA No: 2030ff-0ff
igb 0000:07:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
floppy0: no floppy controllers found
lp: driver loaded but no devices found
fuse init (API version 7.8)
fuse distribution version: 2.7.4
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 16771852k swap on /dev/sda2. Priority:-1 extents:1 across:16771852k
IA-32 Microcode Update Driver: v1.14a
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ib0: enabling connected mode will cause multicast packet drops
ib0: mtu > 2044 will cause multicast packet drops.
ib0: mtu > 2044 will cause multicast packet drops.
ib0: enabling connected mode will cause multicast packet drops
ib0: mtu > 2044 will cause multicast packet drops.
ib1: enabling connected mode will cause multicast packet drops
ib1: mtu > 2044 will cause multicast packet drops.
ib1: mtu > 2044 will cause multicast packet drops.
ib1: enabling connected mode will cause multicast packet drops
ib1: mtu > 2044 will cause multicast packet drops.
NET: Registered protocol family 28
Registered RDS/iwarp transport
Registered RDS/infiniband transport
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Ethernet Channel Bonding Driver: v3.2.3 (December 6, 2007)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified,
otherwise bonding will not detect link failures! see bonding.txt for details.
bonding: bond0: setting mode to active-backup (1).
bonding: bond0: Setting MII monitoring interval to 100.
bonding: bond0: Setting down delay to 5000.
bonding: bond0: Setting up delay to 5000.
ADDRCONF(NETDEV_UP): bond0: link is not ready
ib0: enabling connected mode will cause multicast packet drops
ib0: mtu > 2044 will cause multicast packet drops.
bonding: bond0: Adding slave ib0.
bonding: bond0: Warning: enslaved VLAN challenged slave ib0. Adding VLANs will be blocked as long as
ib0 is part of bond bond0
bonding: bond0: Warning: The first slave device specified does not support setting the MAC address.
Enabling the fail_over_mac option.<6>bonding: bond0: enslaving ib0 as a backup interface with a down link.
bonding: bond0: link status up for interface ib0, enabling it in 5000 ms.
ib1: enabling connected mode will cause multicast packet drops
ib1: mtu > 2044 will cause multicast packet drops.
bonding: bond0: Adding slave ib1.
bonding: bond0: Warning: enslaved VLAN challenged slave ib1. Adding VLANs will be blocked as long
as ib1 is part of bond bond0
bonding: bond0: making interface ib0 the new active one 100 ms earlier.
bonding: bond0: first active interface up!
bonding: bond0: enslaving ib1 as a backup interface with a down link.
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
ib0: mtu > 2044 will cause multicast packet drops.
ib1: mtu > 2044 will cause multicast packet drops.
bonding: bond0: link status up for interface ib1, enabling it in 5000 ms.
RDS/IB: connected to 172.168.8.13 version 3.1
RDS/IB: connected to 172.168.8.11 version 3.1
bonding: bond1: setting mode to active-backup (1).
bonding: bond1: Setting MII monitoring interval to 100.
bonding: bond1: Setting down delay to 5000.
bonding: bond1: Setting up delay to 5000.
ADDRCONF(NETDEV_UP): bond1: link is not ready
bonding: bond1: Adding slave eth1.
bonding: bond1: enslaving eth1 as a backup interface with a down link.
igb 0000:01:00.1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
bonding: bond1: link status up for interface eth1, enabling it in 5000 ms.
bonding: bond1: Adding slave eth2.
bonding: bond1: making interface eth1 the new active one 100 ms earlier.
bonding: bond1: first active interface up!
bonding: bond1: enslaving eth2 as a backup interface with a down link.
ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready
igb 0000:07:00.0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
bonding: bond1: link status up for interface eth2, enabling it in 5000 ms.
RDS/IB: connected to 172.168.8.20 version 3.1
RDS/IB: connected to 172.168.8.14 version 3.1
RDS/IB: connected to 172.168.8.16 version 3.1
RDS/IB: connected to 172.168.8.19 version 3.1
RDS/IB: connected to 172.168.8.15 version 3.1
RDS/IB: connected to 172.168.8.17 version 3.1
RDS/IB: connected to 172.168.8.18 version 3.1
bonding: bond0: link status definitely up for interface ib1.
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:01:00.0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bonding: bond1: link status definitely up for interface eth2.
ipmi message handler version 39.1
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi: Found new BMC (man_id: 0x00002a, prod_id: 0x4701, dev_id: 0x20)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
ipmi device interface
bond0: no IPv6 routers present
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
IPMI poweroff: ATCA Detect mfg 0x2A prod 0x4701
IPMI poweroff: Found a chassis style poweroff function
bond1: no IPv6 routers present
megasas: fasync_helper was not called first
eth0: no IPv6 routers present
oracleoks: module license 'Proprietary' taints kernel.
[Oracle OKS] mallocing log buffer, size=10485760
[Oracle OKS] log buffer = 0xffffc2001013e000
[Oracle OKS] Module load succeeded. Build information: (LOW DEBUG)- (USM_11.2.0.1.0_LINUX.X64_090715.1)
, Built on Aug 2 2009
oracleadvm: no version for "KsRwLockReadTry" found: kernel tainted.
[Oracle ADVM] Module load succeeded. Build information: (LOW DEBUG) - USM_11.2.0.1.0_LINUX.X64_090715.1
Built on Aug 2 2009
[Oracle ACFS] Module load succeeded. Build information: (LOW DEBUG), (USM_11.2.0.1.0_LINUX.X64_090715.1),
Built on Aug 2 2009
RDS/IB: connected to 172.168.8.10 version 3.1
RDS/IB: connected to 172.168.8.10 version 3.1
[Oracle OKS] Cluster Membership change - Current incarn 0x6
[Oracle OKS] Nodes in cluster:
[Oracle OKS] Node 1 (IP 0xaca8080a) Node 2 (IP 0xaca8080b)
[Oracle OKS] Node count 2
[Oracle ADVM] The attempt to open/mount volume RECO-ASM_FILE failed.
[Oracle ADVM] The attempt to open/mount volume RECO-ASM_FILE failed.
[Oracle ADVM] The attempt to open/mount volume RECO-ASM_FILE failed.
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.base_reachable_time; Use net.ipv6.neigh.eth0.base_reachable_time_ms instead.
process `cp' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.base_reachable_time; Use net.ipv6.neigh.eth0.base_reachable_time_ms instead.
usb 8-3.1: new high speed USB device using ehci_hcd and address 4
usb 8-3.1: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 8-3.1: USB disconnect, address 4
usb 8-3.1: new high speed USB device using ehci_hcd and address 5
usb 8-3.1: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb 8-3.1: USB disconnect, address 5
usb 8-3.1: new high speed USB device using ehci_hcd and address 6
usb 8-3.1: device not accepting address 6, error -71
usb 8-3.1: new high speed USB device using ehci_hcd and address 8
usb 8-3.1: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb 8-3.1: USB disconnect, address 8
usb 8-3.1: new high speed USB device using ehci_hcd and address 9
usb 8-3.1: configuration #1 chosen from 1 choice
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 9
usb-storage: waiting for device to settle before scanning
usb 8-3.1: USB disconnect, address 9
usb 8-3.1: new high speed USB device using ehci_hcd and address 10
usb 8-3.1: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 10
usb-storage: waiting for device to settle before scanning
Vendor: TEAC Model: DV-28S-V Rev: 1.0B
Type: CD-ROM ANSI SCSI revision: 00
scsi 11:0:0:0: Attached scsi generic sg1 type 5
usb-storage: device scan complete
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 11:0:0:0: Attached scsi CD-ROM sr0
usb 8-3.1: USB disconnect, address 10
scsi 11:0:0:0: rejecting I/O to dead device
sr0: Hmm, seems the drive doesn't support multisession CD's
scsi 11:0:0:0: rejecting I/O to dead device
scsi 11:0:0:0: rejecting I/O to dead device
scsi 11:0:0:0: rejecting I/O to dead device
scsi 11:0:0:0: rejecting I/O to dead device
scsi 11:0:0:0: rejecting I/O to dead device
scsi 11:0:0:0: rejecting I/O to dead device
scsi 11:0:0:0: rejecting I/O to dead device
scsi 11:0:0:0: rejecting I/O to dead device
RDS/IB: connected to 172.168.8.12 version 3.1
[Oracle OKS] Cluster Membership change - Current incarn 0x8
[Oracle OKS] Nodes in cluster:
[Oracle OKS] Node 1 (IP 0xaca8080a) Node 2 (IP 0xaca8080b) Node 3 (IP 0xaca8080c) [Oracle OKS]
[Oracle OKS] Node count 3
usb 7-3: USB disconnect, address 2
usb 3-1: USB disconnect, address 2
usb 7-3: new high speed USB device using ehci_hcd and address 4
usb 7-3: configuration #1 chosen from 1 choice
hub 7-3:1.0: USB hub found
hub 7-3:1.0: 2 ports detected
usb 7-3.1: new high speed USB device using ehci_hcd and address 6
usb 7-3.1: configuration #1 chosen from 1 choice
scsi12 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb 7-3.2: new high speed USB device using ehci_hcd and address 7
usb 7-3.2: configuration #1 chosen from 1 choice
scsi13 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usb 3-1: new low speed USB device using uhci_hcd and address 3
usb 3-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input5
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input6
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Vendor: AMI Model: Virtual CDROM Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 00
sr0: scsi-1 drive
sr 13:0:0:0: Attached scsi CD-ROM sr0
sr 13:0:0:0: Attached scsi generic sg1 type 5
usb-storage: device scan complete
sd 12:0:0:0: Attached scsi removable disk sdb
sd 12:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 7-3.1: USB disconnect, address 6
usb 7-3.2: USB disconnect, address 7
usb 3-1: USB disconnect, address 3
usb 3-1: new low speed USB device using uhci_hcd and address 4
usb 3-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input7
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input8
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
usb 7-3: USB disconnect, address 4
usb 3-1: USB disconnect, address 4
usb 7-3: new high speed USB device using ehci_hcd and address 9
usb 7-3: configuration #1 chosen from 1 choice
hub 7-3:1.0: USB hub found
hub 7-3:1.0: 2 ports detected
usb 7-3.1: new high speed USB device using ehci_hcd and address 11
usb 7-3.1: configuration #1 chosen from 1 choice
scsi14 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 11
usb-storage: waiting for device to settle before scanning
usb 7-3.2: new high speed USB device using ehci_hcd and address 12
usb 7-3.2: configuration #1 chosen from 1 choice
scsi15 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 12
usb-storage: waiting for device to settle before scanning
usb 3-1: new low speed USB device using uhci_hcd and address 5
usb 3-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input9
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input10
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
Vendor: AMI Model: Virtual Floppy Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Vendor: AMI Model: Virtual CDROM Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 00
sr0: scsi-1 drive
sr 15:0:0:0: Attached scsi CD-ROM sr0
sr 15:0:0:0: Attached scsi generic sg1 type 5
usb-storage: device scan complete
sd 14:0:0:0: Attached scsi removable disk sdb
sd 14:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 7-3.2: USB disconnect, address 12
usb 7-3.1: USB disconnect, address 11
usb 3-1: USB disconnect, address 5
usb 3-1: new low speed USB device using uhci_hcd and address 6
usb 3-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input11
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input12
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
irq 217: nobody cared (try booting with the "irqpoll" option)
Call Trace:
[] __report_bad_irq+0x30/0x7d
[] note_interrupt+0x1e6/0x227
[] __do_IRQ+0xbd/0x103
[] __do_softirq+0x89/0x133
[] do_IRQ+0xe7/0xf5
[] ret_from_intr+0x0/0xa
[] :rds:rds_poll+0x0/0xe8
[] :rds:rds_poll+0x2/0xe8
[] do_sys_poll+0x1b8/0x360
[] __pollwait+0x0/0xe2
[] default_wake_function+0x0/0xe
[] default_wake_function+0x0/0xe
[] default_wake_function+0x0/0xe
[] default_wake_function+0x0/0xe
[] default_wake_function+0x0/0xe
[] sock_common_recvmsg+0x2d/0x43
[] sock_aio_read+0x4f/0x5e
[] sys_sendmsg+0x217/0x28a
[] :rds:__rds_rdma_map+0x2f5/0x319
[] :rds:rds_get_mr+0x34/0x3f
[] :rds:rds_setsockopt+0x9a/0x124
[] sys_poll+0x2d/0x34
[] system_call+0x7e/0x83
handlers:
[] (usb_hcd_irq+0x0/0x55)
Disabling IRQ #217
RDS/IB: send completion on 172.168.8.18 had status 12, disconnecting and reconnecting
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.base_reachable_time;
Use net.ipv6.neigh.eth0.base_reachable_time_ms instead.
[Oracle ADVM] The attempt to open/mount volume RECO-ASM_FILE failed.
[oracle@maclean01 ~]$ /sbin/lsmod
Module Size Used by
sr_mod 50789 0
cdrom 68713 1 sr_mod
oracleacfs 877320 1
oracleadvm 221760 3
oracleoks 276880 2 oracleacfs,oracleadvm
ipmi_poweroff 43401 0
ipmi_watchdog 52641 0
ipmi_devintf 44753 2
ipmi_si 77453 3
ipmi_msghandler 72985 4 ipmi_poweroff,ipmi_watchdog,ipmi_devintf,ipmi_si
sunrpc 197897 1
bonding 117856 0
iscsi_tcp 58305 0
libiscsi 63553 1 iscsi_tcp
scsi_transport_iscsi 67153 3 iscsi_tcp,libiscsi
rds 402096 2364
ib_ipoib 112864 0
ipoib_helper 35472 2 ib_ipoib
ipv6 424737 547 ib_ipoib
xfrm_nalgo 43333 1 ipv6
crypto_api 42945 1 xfrm_nalgo
rdma_ucm 47616 0
ib_ucm 50056 0
ib_uverbs 75440 2 rdma_ucm,ib_ucm
ib_umad 50088 0
rdma_cm 68372 2 rds,rdma_ucm
ib_cm 72744 3 ib_ipoib,ib_ucm,rdma_cm
iw_cm 43400 1 rdma_cm
ib_addr 41736 1 rdma_cm
ib_sa 74760 3 ib_ipoib,rdma_cm,ib_cm
dm_mirror 54089 0
dm_log 44993 1 dm_mirror
dm_multipath 55257 0
scsi_dh 41665 1 dm_multipath
dm_mod 100753 3 dm_mirror,dm_log,dm_multipath
video 53069 0
hwmon 36553 0
backlight 39873 1 video
sbs 49921 0
i2c_ec 38593 1 sbs
button 40545 0
battery 43849 0
asus_acpi 50917 0
acpi_memhotplug 40133 0
ac 38729 0
fuse 81200 0
parport_pc 62313 0
lp 47121 0
parport 73165 2 parport_pc,lp
sg 69865 0
mlx4_ib 99004 0
ib_mad 70564 4 ib_umad,ib_cm,ib_sa,mlx4_ib
ib_core 109184 12 rds,ib_ipoib,rdma_ucm,ib_ucm,ib_uverbs,ib_umad,rdma_cm,ib_cm,iw_cm,
ib_sa,mlx4_ib,ib_mad
joydev 43969 0
shpchp 70765 0
i2c_i801 41813 0
igb 110421 0
i2c_core 56129 2 i2c_ec,i2c_i801
ahci 68937 0
mlx4_core 136676 1 mlx4_ib
pcspkr 36289 0
usb_storage 116513 0
ata_piix 57029 0
libata 209105 2 ahci,ata_piix
cciss 106760 0
megaraid_sas 73796 6
sd_mod 56513 4
scsi_mod 197081 11 sr_mod,iscsi_tcp,libiscsi,scsi_transport_iscsi,scsi_dh,sg,usb_storage,
libata,cciss,megaraid_sas,sd_mod
ext3 168529 2
jbd 94513 1 ext3
ehci_hcd 65613 0
ohci_hcd 55925 0
uhci_hcd 57433 0
[oracle@maclean01 proc]$ cat slabinfo
slabinfo - version: 2.1
# name : tunables : slabdata
acfs_metadata_buffer_cache 0 0 512 8 1 : tunables 54 27 8 : slabdata 0 0 0
acfs_ofsbuf_cache 0 0 136 28 1 : tunables 120 60 8 : slabdata 0 0 0
acfs_inode_cache 0 0 1144 3 1 : tunables 24 12 8 : slabdata 0 0 0
acfs_reqd_fcb_cache 0 0 128 30 1 : tunables 120 60 8 : slabdata 0 0 0
acfs_ccb_cache 0 0 112 34 1 : tunables 120 60 8 : slabdata 0 0 0
acfs_fcb_cache 0 0 472 8 1 : tunables 54 27 8 : slabdata 0 0 0
fio 0 0 24 144 1 : tunables 120 60 8 : slabdata 0 0 0
AsmPhysIo 0 0 112 34 1 : tunables 120 60 8 : slabdata 0 0 0
AsmVolIo 0 0 256 15 1 : tunables 120 60 8 : slabdata 0 0 0
odlm_rsb_cache 0 0 184 21 1 : tunables 120 60 8 : slabdata 0 0 0
odlm_lkb_cache 0 0 312 12 1 : tunables 54 27 8 : slabdata 0 0 0
rpc_buffers 8 8 2048 2 1 : tunables 24 12 8 : slabdata 4 4 0
rpc_tasks 8 10 384 10 1 : tunables 54 27 8 : slabdata 1 1 0
rpc_inode_cache 6 10 768 5 1 : tunables 54 27 8 : slabdata 2 2 0
ip_fib_alias 21 59 64 59 1 : tunables 120 60 8 : slabdata 1 1 0
ip_fib_hash 21 59 64 59 1 : tunables 120 60 8 : slabdata 1 1 0
rds_ib_frag 34720 93564 40 92 1 : tunables 120 60 8 : slabdata 1017 1017 120
rds_ib_incoming 34760 91488 120 32 1 : tunables 120 60 8 : slabdata 2859 2859 120
rds_iw_frag 0 0 40 92 1 : tunables 120 60 8 : slabdata 0 0 0
rds_iw_incoming 0 0 120 32 1 : tunables 120 60 8 : slabdata 0 0 0
RDS 1233 1359 832 9 2 : tunables 54 27 8 : slabdata 151 151 0
rds_connection 12 18 664 6 1 : tunables 54 27 8 : slabdata 3 3 0
fib6_nodes 9 59 64 59 1 : tunables 120 60 8 : slabdata 1 1 0
ip6_dst_cache 10 36 320 12 1 : tunables 54 27 8 : slabdata 3 3 0
ndisc_cache 1 15 256 15 1 : tunables 120 60 8 : slabdata 1 1 0
RAWv6 19 20 960 4 1 : tunables 54 27 8 : slabdata 5 5 0
UDPv6 226 244 896 4 1 : tunables 54 27 8 : slabdata 61 61 0
tw_sock_TCPv6 61 140 192 20 1 : tunables 120 60 8 : slabdata 7 7 0
request_sock_TCPv6 0 0 192 20 1 : tunables 120 60 8 : slabdata 0 0 0
TCPv6 28 52 1728 4 2 : tunables 24 12 8 : slabdata 11 13 0
dm_mpath 0 0 40 92 1 : tunables 120 60 8 : slabdata 0 0 0
dm_uevent 0 0 2608 3 2 : tunables 24 12 8 : slabdata 0 0 0
dm_tio 0 0 24 144 1 : tunables 120 60 8 : slabdata 0 0 0
dm_io 0 0 40 92 1 : tunables 120 60 8 : slabdata 0 0 0
fuse_request 0 0 592 13 2 : tunables 54 27 8 : slabdata 0 0 0
fuse_inode 0 0 640 6 1 : tunables 54 27 8 : slabdata 0 0 0
ib_mad 2048 2168 448 8 1 : tunables 54 27 8 : slabdata 271 271 0
jbd_4k 39 40 4096 1 1 : tunables 24 12 8 : slabdata 39 40 0
scsi_cmd_cache 44 70 384 10 1 : tunables 54 27 8 : slabdata 6 7 0
sgpool-128 32 32 4096 1 1 : tunables 24 12 8 : slabdata 32 32 0
sgpool-64 34 34 2048 2 1 : tunables 24 12 8 : slabdata 17 17 0
sgpool-32 33 36 1024 4 1 : tunables 54 27 8 : slabdata 9 9 0
sgpool-16 34 40 512 8 1 : tunables 54 27 8 : slabdata 5 5 0
sgpool-8 133 150 256 15 1 : tunables 120 60 8 : slabdata 9 10 0
scsi_io_context 0 0 112 34 1 : tunables 120 60 8 : slabdata 0 0 0
ext3_inode_cache 885935 886035 760 5 1 : tunables 54 27 8 : slabdata 177207 177207 0
ext3_xattr 0 0 88 44 1 : tunables 120 60 8 : slabdata 0 0 0
journal_handle 114 288 24 144 1 : tunables 120 60 8 : slabdata 2 2 0
journal_head 568 840 96 40 1 : tunables 120 60 8 : slabdata 21 21 0
revoke_table 4 202 16 202 1 : tunables 120 60 8 : slabdata 1 1 0
revoke_record 0 0 32 112 1 : tunables 120 60 8 : slabdata 0 0 0
uhci_urb_priv 4 67 56 67 1 : tunables 120 60 8 : slabdata 1 1 0
UNIX 686 748 704 11 2 : tunables 54 27 8 : slabdata 67 68 0
flow_cache 0 0 128 30 1 : tunables 120 60 8 : slabdata 0 0 0
msi_cache 40 59 64 59 1 : tunables 120 60 8 : slabdata 1 1 0
cfq_ioc_pool 203 360 160 24 1 : tunables 120 60 8 : slabdata 15 15 0
cfq_pool 162 336 160 24 1 : tunables 120 60 8 : slabdata 14 14 0
crq_pool 93 144 80 48 1 : tunables 120 60 8 : slabdata 3 3 0
deadline_drq 0 0 80 48 1 : tunables 120 60 8 : slabdata 0 0 0
as_arq 0 0 96 40 1 : tunables 120 60 8 : slabdata 0 0 0
mqueue_inode_cache 1 4 896 4 1 : tunables 54 27 8 : slabdata 1 1 0
isofs_inode_cache 0 0 608 6 1 : tunables 54 27 8 : slabdata 0 0 0
hugetlbfs_inode_cache 1 7 576 7 1 : tunables 54 27 8 : slabdata 1 1 0
ext2_inode_cache 0 0 720 5 1 : tunables 54 27 8 : slabdata 0 0 0
ext2_xattr 0 0 88 44 1 : tunables 120 60 8 : slabdata 0 0 0
dnotify_cache 2 92 40 92 1 : tunables 120 60 8 : slabdata 1 1 0
dquot 0 0 256 15 1 : tunables 120 60 8 : slabdata 0 0 0
eventpoll_pwq 1 53 72 53 1 : tunables 120 60 8 : slabdata 1 1 0
eventpoll_epi 1 20 192 20 1 : tunables 120 60 8 : slabdata 1 1 0
inotify_event_cache 0 0 40 92 1 : tunables 120 60 8 : slabdata 0 0 0
inotify_watch_cache 1 53 72 53 1 : tunables 120 60 8 : slabdata 1 1 0
kioctx 347 480 320 12 1 : tunables 54 27 8 : slabdata 40 40 0
kiocb 0 0 256 15 1 : tunables 120 60 8 : slabdata 0 0 0
fasync_cache 0 0 24 144 1 : tunables 120 60 8 : slabdata 0 0 0
shmem_inode_cache 924 940 768 5 1 : tunables 54 27 8 : slabdata 188 188 0
posix_timers_cache 0 0 128 30 1 : tunables 120 60 8 : slabdata 0 0 0
uid_cache 7 30 128 30 1 : tunables 120 60 8 : slabdata 1 1 0
ip_mrt_cache 0 0 128 30 1 : tunables 120 60 8 : slabdata 0 0 0
tcp_bind_bucket 115 448 32 112 1 : tunables 120 60 8 : slabdata 4 4 0
inet_peer_cache 3 30 128 30 1 : tunables 120 60 8 : slabdata 1 1 0
secpath_cache 0 0 64 59 1 : tunables 120 60 8 : slabdata 0 0 0
xfrm_dst_cache 0 0 384 10 1 : tunables 54 27 8 : slabdata 0 0 0
ip_dst_cache 250 590 384 10 1 : tunables 54 27 8 : slabdata 59 59 0
arp_cache 32 90 256 15 1 : tunables 120 60 8 : slabdata 6 6 0
RAW 17 20 768 5 1 : tunables 54 27 8 : slabdata 4 4 0
UDP 705 735 768 5 1 : tunables 54 27 8 : slabdata 147 147 0
tw_sock_TCP 3 20 192 20 1 : tunables 120 60 8 : slabdata 1 1 0
request_sock_TCP 30 90 128 30 1 : tunables 120 60 8 : slabdata 3 3 0
TCP 315 365 1536 5 2 : tunables 24 12 8 : slabdata 73 73 0
blkdev_ioc 203 402 56 67 1 : tunables 120 60 8 : slabdata 6 6 0
blkdev_queue 20 20 1576 5 2 : tunables 24 12 8 : slabdata 4 4 0
blkdev_requests 63 84 272 14 1 : tunables 54 27 8 : slabdata 6 6 0
biovec-256 7 7 4096 1 1 : tunables 24 12 8 : slabdata 7 7 0
biovec-128 7 8 2048 2 1 : tunables 24 12 8 : slabdata 4 4 0
biovec-64 7 8 1024 4 1 : tunables 54 27 8 : slabdata 2 2 0
biovec-16 7 15 256 15 1 : tunables 120 60 8 : slabdata 1 1 0
biovec-4 7 59 64 59 1 : tunables 120 60 8 : slabdata 1 1 0
biovec-1 127 404 16 202 1 : tunables 120 60 8 : slabdata 2 2 0
bio 374 480 128 30 1 : tunables 120 60 8 : slabdata 14 16 0
utrace_engine_cache 0 0 64 59 1 : tunables 120 60 8 : slabdata 0 0 0
utrace_cache 0 0 64 59 1 : tunables 120 60 8 : slabdata 0 0 0
sock_inode_cache 3142 3294 640 6 1 : tunables 54 27 8 : slabdata 549 549 0
skbuff_fclone_cache 329 413 512 7 1 : tunables 54 27 8 : slabdata 59 59 54
skbuff_head_cache 13718 14670 256 15 1 : tunables 120 60 8 : slabdata 978 978 120
file_lock_cache 33 88 176 22 1 : tunables 120 60 8 : slabdata 4 4 0
Acpi-Operand 2525 2596 64 59 1 : tunables 120 60 8 : slabdata 44 44 0
Acpi-ParseExt 0 0 64 59 1 : tunables 120 60 8 : slabdata 0 0 0
Acpi-Parse 0 0 40 92 1 : tunables 120 60 8 : slabdata 0 0 0
Acpi-State 0 0 80 48 1 : tunables 120 60 8 : slabdata 0 0 0
Acpi-Namespace 1082 1232 32 112 1 : tunables 120 60 8 : slabdata 11 11 0
delayacct_cache 1155 1888 64 59 1 : tunables 120 60 8 : slabdata 32 32 0
taskstats_cache 35 265 72 53 1 : tunables 120 60 8 : slabdata 5 5 0
proc_inode_cache 17438 17796 592 6 1 : tunables 54 27 8 : slabdata 2966 2966 0
sigqueue 132 432 160 24 1 : tunables 120 60 8 : slabdata 18 18 0
radix_tree_node 259865 260141 536 7 1 : tunables 54 27 8 : slabdata 37163 37163 0
bdev_cache 28 35 768 5 1 : tunables 54 27 8 : slabdata 7 7 0
sysfs_dir_cache 10415 10648 88 44 1 : tunables 120 60 8 : slabdata 242 242 0
mnt_cache 29 60 256 15 1 : tunables 120 60 8 : slabdata 4 4 0
inode_cache 2386 2758 560 7 1 : tunables 54 27 8 : slabdata 394 394 0
dentry_cache 1081196 1081638 216 18 1 : tunables 120 60 8 : slabdata 60091 60091 0
filp 81069 86250 256 15 1 : tunables 120 60 8 : slabdata 5750 5750 480
names_cache 93 94 4096 1 1 : tunables 24 12 8 : slabdata 93 94 0
avc_node 14 53 72 53 1 : tunables 120 60 8 : slabdata 1 1 0
selinux_inode_security 1710 2064 80 48 1 : tunables 120 60 8 : slabdata 43 43 0
key_jar 28 40 192 20 1 : tunables 120 60 8 : slabdata 2 2 0
idr_layer_cache 128 133 528 7 1 : tunables 54 27 8 : slabdata 19 19 0
buffer_head 4216731 5748080 96 40 1 : tunables 120 60 8 : slabdata 143702 143702 0
mm_struct 477 556 896 4 1 : tunables 54 27 8 : slabdata 139 139 0
vm_area_struct 119228 127336 176 22 1 : tunables 120 60 8 : slabdata 5788 5788 144
fs_cache 479 1180 64 59 1 : tunables 120 60 8 : slabdata 20 20 0
files_cache 446 605 768 5 1 : tunables 54 27 8 : slabdata 120 121 0
signal_cache 681 810 768 5 1 : tunables 54 27 8 : slabdata 162 162 0
sighand_cache 675 726 2112 3 2 : tunables 24 12 8 : slabdata 242 242 0
task_struct 1161 1212 1888 2 1 : tunables 24 12 8 : slabdata 606 606 0
anon_vma 30786 37152 24 144 1 : tunables 120 60 8 : slabdata 258 258 0
pid 1558 2301 64 59 1 : tunables 120 60 8 : slabdata 39 39 0
shared_policy_node 0 0 48 77 1 : tunables 120 60 8 : slabdata 0 0 0
numa_policy 226 576 24 144 1 : tunables 120 60 8 : slabdata 4 4 0
size-131072(DMA) 0 0 131072 1 32 : tunables 8 4 0 : slabdata 0 0 0
size-131072 8 22 131072 1 32 : tunables 8 4 0 : slabdata 8 22 0
size-65536(DMA) 0 0 65536 1 16 : tunables 8 4 0 : slabdata 0 0 0
size-65536 3 3 65536 1 16 : tunables 8 4 0 : slabdata 3 3 0
size-32768(DMA) 0 0 32768 1 8 : tunables 8 4 0 : slabdata 0 0 0
size-32768 5 5 32768 1 8 : tunables 8 4 0 : slabdata 5 5 0
size-16384(DMA) 0 0 16384 1 4 : tunables 8 4 0 : slabdata 0 0 0
size-16384 51 51 16384 1 4 : tunables 8 4 0 : slabdata 51 51 0
size-8192(DMA) 0 0 8192 1 2 : tunables 8 4 0 : slabdata 0 0 0
size-8192 565 565 8192 1 2 : tunables 8 4 0 : slabdata 565 565 0
size-4096(DMA) 0 0 4096 1 1 : tunables 24 12 8 : slabdata 0 0 0
size-4096 917 947 4096 1 1 : tunables 24 12 8 : slabdata 917 947 0
size-2048(DMA) 0 0 2048 2 1 : tunables 24 12 8 : slabdata 0 0 0
size-2048 3836 3892 2048 2 1 : tunables 24 12 8 : slabdata 1945 1946 24
size-1024(DMA) 0 0 1024 4 1 : tunables 54 27 8 : slabdata 0 0 0
size-1024 10741 11108 1024 4 1 : tunables 54 27 8 : slabdata 2777 2777 108
size-512(DMA) 0 0 512 8 1 : tunables 54 27 8 : slabdata 0 0 0
size-512 1570 1672 512 8 1 : tunables 54 27 8 : slabdata 208 209 54
size-256(DMA) 0 0 256 15 1 : tunables 120 60 8 : slabdata 0 0 0
size-256 3758 3960 256 15 1 : tunables 120 60 8 : slabdata 264 264 120
size-128(DMA) 0 0 128 30 1 : tunables 120 60 8 : slabdata 0 0 0
size-64(DMA) 0 0 64 59 1 : tunables 120 60 8 : slabdata 0 0 0
size-64 419980 420493 64 59 1 : tunables 120 60 8 : slabdata 7127 7127 148
size-32(DMA) 0 0 32 112 1 : tunables 120 60 8 : slabdata 0 0 0
size-128 5415 6240 128 30 1 : tunables 120 60 8 : slabdata 208 208 60
size-32 5085 5488 32 112 1 : tunables 120 60 8 : slabdata 49 49 0
kmem_cache 164 164 2688 1 1 : tunables 24 12 8 : slabdata 164 164 0
[oracle@maclean01 ~]$ /sbin/ifconfig -a
bond0 Link encap:InfiniBand HWaddr 80:00:00:48:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
inet addr:172.168.8.10 Bcast:172.168.8.255 Mask:255.255.255.0
inet6 addr: fe80::221:2800:13e:8413/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:65520 Metric:1
RX packets:184405538 errors:0 dropped:0 overruns:0 frame:0
TX packets:176124832 errors:0 dropped:35 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:30945297410 (28.8 GiB) TX bytes:27635080173 (25.7 GiB)
bond1 Link encap:Ethernet HWaddr 00:21:28:6B:02:51
inet addr:172.16.9.20 Bcast:172.16.9.255 Mask:255.255.255.0
inet6 addr: fe80::221:28ff:fe6b:251/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:59600090474 errors:0 dropped:0 overruns:0 frame:0
TX packets:50440920829 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9377243799311 (8.5 TiB) TX bytes:12093687517171 (10.9 TiB)
bond1:1 Link encap:Ethernet HWaddr 00:21:28:6B:02:51
inet addr:172.16.9.24 Bcast:172.16.9.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
bond2 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MASTER MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:21:28:6B:02:50
inet addr:172.16.8.220 Bcast:172.16.8.255 Mask:255.255.255.128
inet6 addr: fe80::221:28ff:fe6b:250/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:899946283 errors:0 dropped:0 overruns:0 frame:0
TX packets:892061685 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:80589528069 (75.0 GiB) TX bytes:796212093678 (741.5 GiB)
Memory:fac60000-fac80000
eth1 Link encap:Ethernet HWaddr 00:21:28:6B:02:51
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:59592011485 errors:0 dropped:0 overruns:0 frame:0
TX packets:50440920830 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9376635582221 (8.5 TiB) TX bytes:12093687519354 (10.9 TiB)
Memory:face0000-fad00000
eth2 Link encap:Ethernet HWaddr 00:21:28:6B:02:51
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:8078995 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:608217729 (580.0 MiB) TX bytes:378 (378.0 b)
Memory:fad60000-fad80000
eth3 Link encap:Ethernet HWaddr 00:21:28:6B:02:53
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Memory:fade0000-fae00000
ib0 Link encap:InfiniBand HWaddr 80:00:00:48:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
UP BROADCAST RUNNING SLAVE MULTICAST MTU:65520 Metric:1
RX packets:178541576 errors:0 dropped:0 overruns:0 frame:0
TX packets:176124832 errors:0 dropped:35 overruns:0 carrier:0
collisions:0 txqueuelen:256
RX bytes:30616915538 (28.5 GiB) TX bytes:27635080173 (25.7 GiB)
ib1 Link encap:InfiniBand HWaddr 80:00:00:49:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
UP BROADCAST RUNNING SLAVE MULTICAST MTU:65520 Metric:1
RX packets:5863962 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:256
RX bytes:328381872 (313.1 MiB) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4072387189 errors:0 dropped:0 overruns:0 frame:0
TX packets:4072387189 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:631992143010 (588.5 GiB) TX bytes:631992143010 (588.5 GiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[oracle@maclean01 ~]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 606208
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) 10240
cpu time (seconds, -t) unlimited
max user processes (-u) 606208
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
